profilit.ec positive profile Joint recommended for mortar laying, manufactured from double-density synthetic material. It is composed of two rigid structural parts joined by soft plastic coated material inserts, available in multiple colors. The CMB joint is used to split the subfloor or screed as required by the project. RESINIL Thermoplastic synthetic resin for COEXTRUSION: Made from primary resin whose composition based on Polyvinyl Chloride characterizes it for high resistance and optimized compatibility with regards to long-lasting adhesion with plasticized resins used in the coextrusion process, i.e. the permanent union of two materials with different degrees of Shore hardness. RESINFLEX Plasticized thermoplastic synthetic resin: Made from primary resin, its polyvinyl chloride composition provides high resistance and compatibility with Resinil in the COEXTRUSION process we use in most expansion joints. Thanks to the nature of the plasticizers used, the material maintains its essential elasticity characteristics over time. coflex >> CMB Co-extruded Synthetic Resinil + Resinflex

APPLICATION 1. Choose the profile according to the loads and expansion to which it will be subjected. If necessary, level the subfloor using a layer of plastic mortar with a width of 10 cm approx. Calculating in advance that when the laying is completed the joint will be perfectly flush with the finished floor; 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length; 4. Align the joint, checking that it is perfectly linear. If present, fix the wings to the substrate using mechanical or chemical expansion plugs sized according...