Datasheet COFLEX CF PRODUCT DESCRIPTION COFLEX CF mortar bed movement joints in co-extruded synthetic resin are conceived to subdivide large tile bays. Exclusively suitable for pedestrian traffic, this profile provides limited protection to the tile edges and compensates slight differential movement due to substrate contraction and expansion. They are installed with thin-set mortar. Ideally used in retail shops, hotels, sports facilities and schools TECHNICAL FEATURES Length: 2,70 meters Coextruded Synthetic Resinil + Resinflex B = 8 mm MATERIAL DESCRIPTION Coextruded Synthetic Resinil + Resinflex RESINIL Thermoplastic synthetic resin for COEXTRUSION: Made from primary resin whose composition based on Polyvinyl Chloride characterizes it for high resistance and optimized compatibility with regards to long-lasting adhesion with plasticized resins used in the coextrusion process, i.e. the permanent union of two materials with different degrees of Shore hardness. RESINFLEX Plasticized thermoplastic synthetic resin: Made from primary resin, its polyvinyl chloride composition provides high resistance and compatibility with Resinil in the COEXTRUSION process we use in most expansion joints. Thanks to the nature of the plasticizers used, the material maintains its essential elasticity characteristics over time.

positive profile APPLICATION 1. Cut the profile to the required length; 2. Make sure the groove or joint you're filling is the right size for the profile to fit into. Generally, for wooden floors, calculate 0.5 mm less than the joint; for stone and ceramic floors, the measurement is the joint's size. 3. Apply the adhesive (FIXXTEC) in the groove; 4. Position the profile by inserting it with uniform pressure and using a rubber mallet; 5. Remove any adhesive residue from the profile immediately. SYNTHETIC RESIN: Thermoplastic synthetic resin does not require any special maintenance. It can be easily...