Catalogs >
PROFILITEC >
Coflex CF

Coflex CF
1Pages

Catalog excerpts

Synthetic material movement joint designed to subdivide a tiled bay area into smaller sections. This joint is solely recommended for pedestrian transit as it offers limited protection to the tiles edges. Conceived to compensate only slight compression and sliding movements at the screed- substrate level. Suggested flooring bays 16 m² (as per standard UNI 11499:2013) Typical flooring areas: retail shops, hotels, sporting centers and schools. Illustrated scale dimension 1:1 INSTALLATION: • Align and position the joint profile in screed cut/joint so that it protrudes slightly above the screed level. • Proceed with tiling as normal. • Complete the covering installation job by levelling the joint profile down until its solidly imbedded and flush with the tile edge. • Grout over the covering including the small gaps between the tiles and joint. COFLEX CF-P* Co-extruded synthetic resin PVC profile with fair tolerance against main corrosion present in detergents. Applicable both indoors and outdoors. H=mm Material: PVC Colour: Grey + Infill Transparent (P10), Cement grey (23) expansion joints separation deep bed

Open the catalog to page 1