Catalogs >
PROFILITEC >
Coflex CD

Coflex CD
1Pages

Catalog excerpts

Synthetic material movement joint designed to subdivide a tiled bay area into smaller sections.The layer may utilize one or more connecting extension pieces so as to match higher mortar bedding. This joint is recommended solely for pedestrian transit as it offers limited protection to the tile edges. Conceived to compensate only slight compression and sliding movements at the screed- substrate level. Suggested flooring bays 16 m² (as per standard 8 UNI 11499:2013) Typical flooring areas: retail shops, hotels, sporting centers and schools. 23 Illustrated scale dimension 1:1 INSTALLATION: • Align and position the joint profile in screed cut/joint so that it protrudes slightly above the screed level. • Proceed with tiling as normal. • Complete the covering installation job by levelling the joint profile down until its solidly imbedded and flush with the tile edge. • Grout over the covering including the small gaps between the tiles and joint. COFLEX CD-P* Co-extruded synthetic resin PVC profile with fair tolerance against main corrosion present in detergents. Applicable both indoors and outdoors. Colour: Grey Transparent (P10), Cement grey (P23) +1/-1 modular deep bed expansion

Open the catalog to page 1