Datasheet COFLEX CB PRODUCT DESCRIPTION COFLEX CB profiles are composed of twin metal profiles joined by a central synthetic resin seal. Designed to bear distributed loads, the vertical edge has a patented dovetailed internal cavity which maximizes grout grip and tile edge protection. The central rubber insert absorbs and redistributes differential movement within the tile surface. The profile size is chosen according to the tile thickness and should remain 5 +/- 1mm below the floor elevation. Ideally used in retail shops, hotels, sports facilities and schools. TECHNICAL FEATURES Length: 2,70 meters - Insert assembled. A - B + Synthetic Insert Resinflex Synthetic Insert Resinflex MATERIAL DESCRIPTION Natural Aluminium + Synthetic Resinflex insert The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. RESINFLEX Plasticized thermoplastic synthetic resin: Made from primary resin, its polyvinyl chloride composition provides high resistance and compatibility with Resinil in the COEXTRUSION process we use in most expansion joints. Thanks to the nature of the plasticizers used, the material maintains its essential elasticity characteristics over time.

MATERIAL DESCRIPTIONBrass Profiles made from CW618N (EN 12167) brass alloy are characterized by high resistance to mechanical stress, making them particularly suitable for heavy-traffic applications, such as industrial settings and at expansion joints. Brass is resistant to most chemical agents commonly encountered during the installation of ceramic coverings. However, in the presence of humidity or aggressive substances, the surface may develop superficial oxidation, which can be removed using a standard polishing product. These profiles can be manufactured through either hot extrusion or cold...

APPLICATION 1. Choose the H-size profile corresponding to the thickness of the tile to be laid, taking care to ensure that the profile does not exceed the edge of the floor but is positioned 0.5 to 1 mm lower. 2. Spread the adhesive in the profile application area with the help of a notched trowel; 3. Cut the profile to the required length and place it so that the base sinks into the adhesive, pressing and aligning it; 4. Apply an additional layer of adhesive to the perforation and in the cavities of the vertical section of the profile in contact with the edge of the floor; 5. Generally leave...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ ___________________ (see Material Description section) of characteristic size __________________ mm, equipped with perforated fin and undercut on the side in contact with the tile which guarantee a perfect grip with the adhesive used and with internal part closed by an elastic element for better control of expansions in compression. Family type _________________________ of the Profilitec company as an elastic joint and protection of the covering to be supplied...