Datasheet COFLEX CA PRODUCT DESCRIPTION Conceived to subdivide large tile bays, COFLEX CA movement joints in co-extruded synthetic resin are composed of rigid, perforated anchoring flanges and a durable, soft upper surface which is resistant to mildew, bacteria, weathering, corrosion, wear and UV rays. Suitable for indoor and outdoor applications; the profile section provides limited protection to the tile edge. Ideally used in retail shops, hotels, sports facilities and schools. TECHNICAL FEATURES Length: 2,70 meters Coextruded Synthetic Resinil + Resinflex B = 10 mm MATERIAL DESCRIPTION Coextruded Synthetic Resinil + Resinflex RESINIL PVC-based thermoplastic synthetic resin for COEXTRUSION: Made from primary resin whose composition based on Polyvinyl Chloride characterizes it for high resistance and optimized compatibility with regards to long-lasting adhesion with plasticized resins used in the coextrusion process, i.e. the permanent union of two materials with different degrees of Shore hardness. RESINFLEX Thermoplastic synthetic resin in PVC plasticized with rubber: Made from primary resin, its polyvinyl chloride composition provides high resistance and compatibility with Resinil in the COEXTRUSION process we use in most expansion joints. Thanks to the nature of the rubber plasticizers used, the material maintains its essential elasticity characteristics over time.

positive profile coflex >> CA Co-extruded Synthetic Resinil + Resinflex 1. Choose the profile based on the loads and expansions to which it will be subjected, define the height of the profile corresponding to the thickness of the covering to be laid, paying absolute attention that the profile must not exceed the edge of the covering but be positioned 0.5 -e 1 mm lower; 2. Cut the profile to the desired length; 3. Apply the tile adhesive to the surface where the profile will be laid and position it, pressing it so that it is embedded in it; 4. Apply an additional layer of adhesive to the perforation...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ _________________ (see Material Description section) of characteristic size __________________ mm, equipped with a perforated fin which guarantees perfect grip with the adhesive used and with an internal part closed by an elastic element for better control of expansions in compression. Family type _________________________ of the Profilitec company as an elastic joint and protection of the covering to be supplied and installed properly following the methods...