Catalogs >
PROFILITEC >
Coflex CA

Coflex CA
1Pages

Catalog excerpts

Control movement joint in synthetic co-extruded material with a soft visible side and a more rigid fixing flange. Designed to divide large tiled areas in smaller bays. The soft plastic is resistant to most relevant chemicals encountered in tile applications, to weathering, ageing and UV rays. It will remain flexible and resistant to attack from fungus and bacteria. Suitable for internal and external use and maintenance free. It offers only a limited protection to the tiles edges. Suggested flooring bays 16 m2 (as per standard UNI 11499:2013). Typical flooring areas: retail shops, hotels, sporting centers and schools. Illustrated scale dimension 1:1 (CA 100*) INSTALLATION: • Select a joint with the height matching exactly the tile thickness (the joint must not rise above the level of covering surface but should be laid 0,5 ÷ 1 mm below the edge of the tiles). • Trowel adhesive as normal. • Align the joint over the screed joint (if not existent, cut the screed for at least 2/3 of its thickness). • Lay tiles alongside the flanges so that they are solidly embedded and flush with the profile. • The joint between the tile and the profile to be filled completely with grout. COFLEX CA-P* Co-extruded synthetic resin Synthetic material profile joint with technical characteristics which offer high elasticity, durability and tolerance to common corrosion. Supplied in different colours to combine with main grout colors and different covering materials. Applicable for both indoor and outdoor coverings. H=mm Material: Resinflex + Resinil Colour*: Pure white (P11), Cement grey (P23), Beige (P32), Black (P51) separation thin-bed expansio

Open the catalog to page 1

Coflex CA 1Pages

Catalog excerpts

All PROFILITEC catalogs and technical brochures

Coflex CA
1Pages