Datasheet BORDERTEC BR PRODUCT DESCRIPTION Perimeter profile that finishes and protects the exposed concrete edge of balconies and terraces incorporating a symetrically shaped upper edging trim designed to frame the tiles surface. Particularly suitable for tiling on pre-existing floors. Includes an intergrsted "drip-lip". It is important to leave a space between elements for thermal expansion and covered by the covering cap. TECHNICAL FEATURES Length: 2,70 meters MATERIAL DESCRIPTION Aluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. POWDER COATED ALUMINUM: Powder coating begins with a chromium phosphate pre-treatment, followed by electrostatic application of polyester powders that offer high resistance to U.V. rays and atmospheric agents. The entire surface of the profile is coated with an average thickness of approximately 60 microns. A hot cross-linking polymerization process is then carried out to ensure maximum chemical and mechanical resistance.

bordertec >> BR in Powder Coated Aluminum bordertec >> BRG Joint in Powder Coated Aluminum APPLICATION 1. Choose the H-size profile corresponding to the thickness of the covering to be laid, taking care to ensure that the profile does not exceed the edge of the covering but is positioned 0,5 to 1 mm lower; 3. Fix the profiles to the screed with nails, taking care to separate them by at least 1 cm from the screed and taking care to leave at least 0.5 cm of space between adjacent profiles and mask that space with the joint; 4. Spread the adhesive in the profile application area with the help of...

WARNINGS These profiles must be handled with care, taking care to use cut-resistant gloves. The instructions and requirements contained herein, while based on our experience, are to be considered purely indicative and must be confirmed by exhaustive practical applications. Profilitec declines all responsibility for any damage to persons or property resulting from improper use of the product. The user is responsible for determining whether or not the product is suitable for use and assumes all responsibility for any damage resulting from incorrect installation of the material. BILL OF QUANTITIES...