Datasheet BORDERTEC BO PRODUCT DESCRIPTION “L” shaped perimeter profile to protect and terminate external concrete edges. Designed for tile protruding over a screed base. Leave the necessary space between the different elements for thermal expansion by covering the space with the connector pieces. TECHNICAL FEATURES Length: 2,70 meters Stainless Steel - Aluminum MATERIAL DESCRIPTION Stainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material using rotating nylon and quartz fiber brushes. This process gives the surface a matte appearance without altering its characteristics. AISI 304 STAINLESS STEEL - EN X 5 CrNi 18 10 - DIN 1.4301: This steel belongs to the AUSTENITIC category and is the most widespread and commonly used alloy for products requiring high technical and performance characteristics. It is highly resistant to most chemical agents but may stain or darken superficially; a standard polishing product is sufficient to restore its original appearance.

MATERIAL DESCRIPTIONAluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. POWDER COATED ALUMINUM: Powder coating begins with a chromium phosphate pre-treatment, followed by electrostatic application of polyester powders that offer high resistance to U.V rays and atmospheric agents. The entire surface of the profile is coated with an average thickness of approximately 60 microns. A hot cross-linking polymerization process is then carried...

bordertec >> BOG Joint in Powder Coated Aluminum Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] Profilitec Corp. Profilitec France e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

APPLICATION 1. Choose the H-size profile corresponding to the thickness of the covering to be laid, taking care to ensure that the profile does not exceed the edge of the covering but is positioned 0,5 to 1 mm lower; 2. Cut to the desired length; 3. Fix the profiles to the screed with nails, taking care to separate them by at least 1 cm from the screed and taking care to leave at least 0.5 cm of space between adjacent profiles and mask that space with the joint; 4. Spread the adhesive in the profile application area with the help of a notched trowel; 5. Apply the desired waterproofing system...

BILL OF QUANTITIES ITEM Supply and installation of profile in __________________________ (material), with finish ____________________________ ___________________ (see Material Description section) with characteristic dimensions __________________ mm, equipped with perforated tab that guarantees perfect adhesion with the adhesive used. Profile with straight lower part flush with the wall to be mounted 10 mm from it to keep the screed thickness protected and ventilated. Family type _________________________ from the Profilitec company as a painted aluminium perimeter profile suitable for laying...