Datasheet BORDERTEC BBS-BCS PRODUCT DESCRIPTION This is a perimeter profile for the finishing and protection of the external tile border. It also has an upper edging trim designed to frame tiled surfaces where they are laid flush with the screed. TECHNICAL FEATURES Length: 2,70 meters

positive profile MATERIAL DESCRIPTIONStainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material...

positive profile MATERIAL DESCRIPTIONAluminum The primary aluminum alloy EN AW-6060 in T6 temper is suitable for complex extrusions, offering high strength and an excellent natural surface finish that lends itself well to subsequent finishing processes. ANODIZED ALUMINUM: The anodic oxidation process provides protection against corrosion caused by atmospheric agents, without involving galvanic treatments. In accordance with the EN 12373 standard, profiles undergo preliminary treatments that create a uniformly matte surface. They are then colored through an electrochemical oxidation process in...

bordertec >> BBSGT Joint in Powder Coated Aluminum bordertec >> BCS in Powder Coated Aluminum bordertec >> BCSE External corner in Powder Coated Aluminum bordertec >> BCSG Joint in Powder Coated Aluminum Profilitec Corp. e-mail: [email protected] e-mail: [email protected] Profilitec France e-mail: [email protected] ProfilitecS.p.A. Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected]

bordertec >> BBSG Joint in Embossed Powder Coated Aluminum Profilitec S.p.A. Profilitec Corp. Profilitec France Via Scotte, 3 - 36033 Isola Vicentina (Vicenza), ITALY e-mail: [email protected] e-mail: [email protected] e-mail: [email protected] Profi|itec lberica, S.L.U. e-mail: [email protected]

positive profile bordertec >> BCSE External corner in Embossed Powder Coated Aluminum

positive profile bordertec >> BCSG Joint in Embossed Powder Coated Aluminum 1. Choose the H-size profile corresponding to the thickness of the covering to be laid, taking care to ensure that the profile does not exceed the edge of the covering but is positioned 0,5 to 1 mm lower; 3. Fix the profiles to the screed with nails, taking care to separate them by at least 1 cm from the screed and taking care to leave at least 0.5 cm of space between adjacent profiles and mask that space with the joint; 4. Spread the adhesive in the profile application area with the help of a notched trowel; 5. Apply...

CLEANING AND MAINTENANCE STAINLESS STEEL: Stainless steel is easy to clean and very hygienic because of its smooth, nonporous surface, which hinders the growth of bacteria. To keep it in good condition, simply wash it with warm soapy water, rinse it thoroughly and dry it with a soft cloth. If exposed to weathering, periodic cleaning is recommended to prevent corrosion. Brushed surfaces should be cleaned in the direction of brushing. In case of scratches, a specific polish can be used with a soft cloth. Avoid cleaning agents containing hydrochloric acid, hydrofluoric acid or bleach, as well as...