Technical Specifications for Refrigeration Chambers
8Pages

REFRIGERATION CHAMBERS

INTRODUCTION This Manual is intended for familiarization with, and the rules of operation for, heat-insulating refrigeration chambers. The installation, commissioning and maintenance of the chambers is to be carried out by specialized contractors. This manual includes technical data. 1. PRODUCT OVERVIEW 1.1.USE OF THE PRODUCT Heat-insulating refrigerating chambers of the medium-temperature and low-temperature types (hereinafter – chambers) are intended for the short-term storage of chilled or frozen food products in heated and unheated rooms at temperature from –30° C to + 40° С with a...

2. TECHNICAL INFORMATION 2.1 SHIPMENT DETAILS The delivery set includes a chamber (in the form of a set of panels), operating documents, removable parts and assembly units (table 2). Table 2 - the set of the chambers according to Document … dated …. Panels: Outside corner Inside corner Channel Door * - Filled depending on the volume of the chamber 2.2. CERTIFICATE OF ACCEPTANCE Chamber type with serial number ____________ corresponds to the ProfHolod technical specifications TU 5151-00377983254-2009 and is recognized as fit for operation. Release date ____________________________...

3. INTENDED USE 3.1. GENERAL INSTRUCTIONS The operating instructions provide all the information required for the correct operation and maintenance of the chamber during its direct use. The durability of the chamber and its safety when in use depends on whether the rules of operation have been adhered to. 3.2. SECURITY MEASURES The electrical safety of the chamber is ensured by fulfilling the requirements of grounding the refrigeration machine installed into the chamber, as well as adhering to any additional electrical safety requirements of the refrigeration machine. If these requirements...

The packed chamber can be transported by all means of transport. During transportation, - the shipping containers should be protected from mechanical damage, - the packaged goods should be secured in stable positioning. DO NOT TILT THE PACKAGES 4. MAINTENANCE 4.1 GENERAL INFORMATION There are two types of maintenance for the product – while in use and regulatory. Maintenance while using the chamber includes monitoring the temperature in the refrigerated space, its correct loading and installation of the internal equipment. The chamber must be kept clean during use. When sanitizing, avoid...

Act for beginning operation This act was drawn up on "___" _____________ 20 by the owner of a heat-insulating chamber _________________________________________________________________ (name and address of the organization, position, full name) and by a representative of a center for technical servicing _________________________________________________________________ (name of organization) _________________________________________________________________ (position, full name) stating that a chamber of type __________ volume ____________ m3 serial number________ produced on "___"_______20...

City (place) of acceptance of the product _______________________________________ Name of the recipient (organization, enterprise) of the product ______________________ ________________________________________________________________________ Recipient address and shipping details ____________________________________ __________________________________________________ "___" _________ 20 ACT OF TECHNICAL CONDITION This act was drawn up by ______________________________________________ (recipient representative, surname, position) in collaboration with representatives...