THERMAL SOLUTIONS OVERVIEW Spacetherm® CBS (Cold Bridge Strip) uses Spacetherm® aerogel insulation encapsulated in Polyethelene for use in the prevention of cold bridging through a component or element of a structure. Spacetherm® CBS is an ideal specification when trying to reduce cold bridging in timber or steel frame structures. Upon request the Spacetherm® CBS can be cut to a variety of widths to suit different applications. KEY FEATURES • Thin thermal bridge insulation ideal for timber or steel frame structures. • Fully encapsulated. • The best thermal performance available. • Fast and easy to fix with adhesive backing. • Constant long term thermal performance 50 years +. • Available to any width, thickness or length. • Non-hazardous material. Image showing Spacetherm® CBS components, encapsulated Spacetherm® aerogel insulation. Cold Bridge Strip Peel off release paper to temporarily adhere to structure where required. CUTTING Spacetherm® CBS can be cut using scissors or knife. Care should be taken that cutting blades are kept sharp, if using a knife, the angle between the blade and the Spacetherm® CBS should be kept as low as possible. It is advisable to reseal the ends with tape after cutting is complete. Image showing Spacetherm® CBS applied to a timber frame structure Spacetherm® CBS is supplied with double sided adhesive tape for ease of installation. Spacetherm® CBS can be applied to either timber or metal framing systems. Cold Bridge Strip Image showing Spacetherm® CBS applied to a metal frame structure www.proctorgroup.com The Haugh, Blairgowrie, Perthshire, PH10 7ER Tel: 01250 872 261 Fax: 01250 872 727 email: [email protected]

THERMAL SOLUTIONS HEALTH & SAFETY K-Factor Aerogel Fire Resistance Aerogel Vapour Resistance Compressive Strength Spacetherm® CBS and in particular the dust produced when cutting and handling the material may cause drying of the skin and therefore gloves and dust masks should be worn when handling the material. Ensure the working space is well ventilated and when necessary appropriate personal protection equipment should be used. Physical Properties For other thicknesses, or for U-value calculations for your project, please contact Technical Services on 01250 872261 or [email protected]...