Spacetherm Building & Construction
16Pages

SPACETHERM SLENTEX® A2 AND SPACETHERM AEROGEL INSULATION (For Building & Construction)

Spacetherm: Class leading thermal performance with breathability and water resistance The A Proctor Group Ltd has been proudly pioneering thermal solutions for over half a century. Spacetherm® SLENTEX® A2 is the result of extensive research and development to produce a vapour permeable insulation with an A2 fire rating classification. Spacetherm SLENTEX® A2 is classified as Class A2, s1 –d0 according to the Euroclass system, which classifies the reaction to fire performance of building products. THE KNOWLEDGE TO PRODUCE SOLUTIONS Spacetherm SLENTEX® A2 is a flexible, high-performance,...

SPACETHERM SLENTEX® A2 Spacetherm SLENTEX® A2 is a flexible, high-performance, silica aerogel-based insulation material of limited combustibility used for exterior and interior applications. The product is used to optimise the thermal performance and fire properties of façade systems in a number of ways.These include enhancing the thermal performance of the ventilated façade, and addressing thermal bridging in the façade. Spacetherm SLENTEX® A2 is also useful in minimising thermal bridges around windows in areas such as window reveals and roller shutter cases. With a thermal conductivity of...

SPACETHERM BLANKET The ongoing issue of hard - to - treat walls in the UK can be overcome utilising Spacetherm - an ultra - thin insulation for thermal upgrades, saving valuable space without altering the exterior fabric of the building. Spacetherm can be supplied on its own and cut to size or laminated to a number of facings to suit your individual requirements. Its remarkable performance is achieved through the use of flexible aerogel blankets. The insulation used in Spacetherm is material derived from silica gel. The Spacetherm Blanket consists of unfaced sheets of high performance...

Spacetherm Slentex A2** / Spacetherm SPACETHERM A2 DIRECTFIX / SPACETHERM DIRECTFIX Spacetherm A2 Directfix is a high performance laminate which is specifically designed to be fixed directly to the wall. It consists of Spacetherm SLENTEX® A2 insulation blanket bonded to plasterboard, with an additonal pre-bonded plywood reinforcement to the plasterboard. This reinforced laminate will reduce the risk of shot-fired nails failing to create a robust fix and will also reduce the risk of drill bit snagging, should you be using a traditional mechanical fixing method. Ideal for use in applications...

Spacetherm A2 Wallboard is a high performance laminate which is specifically designed to be fixed to timber straps. It consists of Spacetherm SLENTEX® A2 insulation blanket bonded to plasterboard, and is ideal for use in applications where low U-values are required but space is at a premium. Spacetherm A2 Wallboard is supplied with foil faced plasterboard as standard to reduce condensation. Plain plasterboard is available on request. Spacetherm A2 Wallboard lining boards can achieve similar performance to traditional plasterboard laminates, but at a fraction of the thickness, allowing...

Spacetherm Slentex A2** / Spacetherm SPACETHERM A2 MULTI / SPACETHERM MULTI Spacetherm A2 Multi is a high-performance laminate specifically designed to be laid directly onto existing floors & walls. Spacetherm Multi consists of Spacetherm SLENTEX® A2 insulation blanket bonded to a 6mm Magnesium Oxide Board. Spacetherm SLENTEX® A2 blanket is available in various thicknesses from 10mm to 40mm (in multiples of 10). This solution is ideal for use in applications where low U-values are required and room space is at a premium (such as loft conversions). Spacetherm A2 Multi can achieve similar...

SPACETHERM A2 DIRECTFIX U-VALUE - PERFORMANCE READY RECKONER BASE WALL CONSTRUCTION BASE WALL CONSTRUCTION Spacetherm Wallboard onto timber battens SPACETHERM WALLBOARD Base Wall Performance 2.12 W/m2K 220mm Brick (no cavity) 13mm Plaster OVERALL THICKNESS Ready Reckoner SPACETHERM A2 WALLBOARD U-VALUE - PERFORMANCE READY RECKONER Spacetherm Directfix SPACETHERM DIRECTFIX Base Wall Performance 2.12 W/m2K 220mm Brick (no cavity) 13mm Plaster OVERALL THICKNESS SPACETHERM A2 MULTI U-VALUE - PERFORMANCE READY RECKONER BASE WALL CONSTRUCTION Spacetherm Multi onto timber battens SPACETHERM MULTI...

SPACETHERM MULTI U-VALUE - PERFORMANCE READY RECKONER FOR FLOORS OVERALL THICKNESS SPACETHERM MULTI Base Floor Performance = 0.99 W/m2K OVERALL THICKNESS SPACETHERM MULTI Base Floor Performance = 0.85 W/m2K OVERALL THICKNESS SPACETHERM MULTI Base Floor Performance = 0.67 W/m2K BASE FLOOR CONSTRUCTION Ready Reckoner BASE FLOOR CONSTRUCTION BASE FLOOR CONSTRUCTION BASE FLOOR CONSTRUCTION Base Floor Performance = 0.42 W/m2K SPACETHERM MULTI 125mm Concrete Slab P/A Ratio = 0.25 OVERALL THICKNESS Statement Regarding ‘Weeping’ Reported in Some MgO Boards Further to all the controversy regarding...

Cold Bridge Strip Designed to prevent cold bridging through a component or element of a structure. Spacetherm A2 CBS (Cold Bridge Strip) consists of Spacetherm SLENTEX® A2 insulation blanket encapsulated in various materials. Spacetherm A2 CBS is an ideal choice for timber or steel frame structures and on request, can be cut to a variety of widths to suit different applications. In addition to timber and steel structures, it can also be used in other applications where cold bridging is an issue. This product is also available using Spacetherm Aerogel blanket insulation. Full installation...

Image showing Spacetherm® WRB applied internally to a reveal on an existing external wall structure. SPACETHERM A2 WRB / SPACETHERM WRB Spacetherm A2 WRB (window reveal board) is a high-performance laminate specifically designed to be fixed or glued to the existing solid wall at the window reveals. Spacetherm WRB consists of Spacetherm SLENTEX® A2 insulation blanket bonded to plasterboard or Magnesium Oxide board, with or without plywood reinforcement, depending on fixings. It is ideal for use in applications where cold bridges are present, but space is limited. Spacetherm SLENTEX® A2...