ACOUSTIC FLOOR & WALL SOLUTIONS PROFLOOR ACTIV BATTEN DESCRIPTION A composite batten utilising a unique vertically oriented fibre which has been designed to improve the acoustic performance of concrete and timber frame floors. The enhanced performance levels will help satisfy Building Regulations requirements and in the ‘deep’ batten format will satisfy the requirements of Robust Details FFT1 for timber floors E-FT-1, E-FT-2 and E-FT-3. KEY FEATURES • Designed to reduce both airborne and impact sound performance. • Single Batten for use in main floor area, perimeters, kitchens and bathrooms. • High performance resilient layer – 13mm. • Unique vertical oriented fibres act like springs. • Limited long-term deflection or ‘creep’ ensures sustained performance. • 3.6m length batten for quicker installation. A composite batten which has been designed to improve the acoustic performance of concrete and timber floors. • Moisture resistant impregnated battens are available. ADVANTAGES • Ideal for both new build and refurbishment • Significantly reduces impact and airborne noise pollution in multi level buildings. • Supremely versatile, making it suitable for most domestic flooring applications. • Easy and fast to install to joisted or concrete floors (pre-cast or in situ) • Floors can be used immediately after installation. • Designed to last the lifetime of the floor. • Non load bearing partition walls can be erected on the finished acoustic floor where a double batten run has been positioned below. PHYSICAL PROPERTIES Standard Sizes: 58mm x 45mm x 3600mm length 72mm x 45mm x 3600mm length Flanking Strip: 100mm wide x 5mm thick (10m rolls) 125mm wide x 5mm thick (10m rolls) 150mm wide x 5mm thick (10m rolls) Robust details E-FT-1 Tested floor construction (RD appendix C) Airborne: Rw+Ctr=15dB Impact: Lw=19dB Concrete Floor Construction (RD Appendix D) Impact: Lw = 24dB ROBUST DETAILS FFT 1 Resilient composite deep batten system Suitable for use on the following RD floors: • E-FT-1 (using 72mm batten) • E-FT-2 (using 72mm batten) • E-FT-3 (using 72mm batten) • E-FS-2 (using 72mm batten) FFT 3 Resilient composite batten system Suitable for use on the following RD floors:

ACOUSTIC FLOOR & WALL SOLUTIONS TECHNICAL SERVICES The A Proctor Group’s technical back-up has always been an integral part of our strategic development, with an outlook based on advanced technical solutions, rather than commodity driven. Our dedicated technical team is focussed on providing high quality advice and support to our customers all the way from drawing board to site. Our experienced in-house technical staff are fully trained on industry-standard software and procedures from across our product ranges allowing our customers to specify and install our products safe in the knowledge...