Sand lters RTM FILTERS PREMIUM, EXCELLENCE OR CLASSIC, the choice for simple, reliable efciency HYDRAULICALLY OPTIMISED

RTM Range A comprehensive range to suit every pool HYDRAULICALLY OPTIMISED RTM SIDE CLASSIC AND TOP FILTERS SIDE AND TOP *Due to the load loss generated, the maximum recommended ow rate for 920 lters tted with a 2’’ inch valve is 26 m3/h (at this ow rate the throughput is approximately 40m3/h/m²). Bar laterals, 6 branch manifold with automatic vent (Side) Wide opening, diameter 250 mm, to hold the Top lid (not assembled) with its o-rings and valve, 1”1/2 or 2” valve provided (not assembled, comes in a separate package), Inner pipework diameter, 50 mm or 63mm. Available in Top 2” up to model 920,...

TECHNICAL DATA TECHNICAL DATA Blue lter tank, Wide transparent lid, diameter 250 mm, with air vent, Stainless steel case pressure gauge integrated into the lid, No threading on the lid, 1”1/2 or 2” multi-port valve with solvent unions, pre-mounted on the lter, Pipework 63 mm, with large radius elbow, fully removable, The upper manifold can be rotated by 90°to protect the pipes while adding the lter medium, Lower drain, diameter 50 mm, Lower drain strainer, unscrewed from the exterior, A 38mm barbed union may be tted onto the lower drain to allow connection of a drainage hose, High linear ow rate...

RTM Range RTM Premium, Excellence or Classic lters, the last word in laminated polyester lters ! RTM lters are made in our factory in France. Resin Transfer Moulding, a cutting edge technique, involves the injection of polyester resin onto a multi-axial glass substrate. The production line is entirely automated, guaranteeing irreproachable reproducibility. RTM EXCELLENCE and CLASSIC SIDE DIMENSIONS VALVE RESPECTFUL OF THE ENVIRONMENT: RTM lters are made in France. The Resin Transfer Moulding process respects the european directives governing the emission of Volatile Organic Compounds. CONTROLLED,...