Technical features: • 0 42 mm 304L stainless steel tubes, nuts and bolts in A4 stainless • The treads are fastened to the tubes through flow drilled holes on the tread-side, this method ensures an impeccably smooth finish with no sharp edges likely to cause injury • Comes with 2 anchor sockets and 2 stainless steel escutcheon • Available with 2,3,4 or 5 treads (with reinforced resin end pieces) • Distance between the centre of the anchor socket and the edge of Technical features: • 0 43 mm 316-L stainless steel tubes, • Flow drilling: The treads are fastened to the upright tubes through flow drilled holes on the tread-side, this method ensures an impeccably smooth finish with no sharp edges likely • Stainless steel treads (with reinforced resin end pieces), • Type A4 nuts and bolts, • Safety step. Plate socket version for wooden pools Technical features: • 0 42 mm 304L stainless steel tubes, nuts and bolts in A4 stainless steel • The treads are fastened to the tubes through flow drilled holes on the tread-side, this method ensures an impeccably smooth finish with no sharp edges likely to cause injury • Comes with 2 anchor sockets and 2 stainless steel escutcheon plates • Available with 2,3,4 or 5 treads (with reinforced resin end • Distance between the centre of the anchor socket and the

Aquamatic by Ladder RAMBOUILLET Technical features: Ø 42 mm 304L stainless steel tubes, nuts and bolts in A4 stainless steel The treads are fastened to the tubes through ow drilled holes on the tread-side, this method ensures an impeccably smooth nish with no sharp edges likely to cause injury The upper section is delivered with 4 anchor sockets and 4 stainless steel escutcheon plates The submerged section is delivered with 2 stainless steel plate sockets and 2 adhesive seals Available with 3 or 4 stainless steel treads (with reinforced resin end-pieces) 161 495 Ladder hinges Hand rails 2 models...