StainShield® Solid Color Deck Stain
2Pages

{{requestButtons}}

Catalog excerpts

StainShield® Solid Color Deck Stain - 1

Product Data Sheet Technical Data Vehicle: Finish: StainShield Solid Color Deck Stain Flash Point: Volume Solids*: 40 ± 2% Weight Solids*: 54 ± 2% Weight/Gallon*: 10.8 lb/gal VOC (less exempt solvents)*: VOC: 120 g/L - 1.00 lb/gal as per 40 CFR 59.406 StainShield Solid Color Deck Stain is formulated to provide long lasting beauty and protection for your deck. It is ideal for decks ® manufactured from composition decking materials. StainShield Solid Color Deck Stain may be applied to damp surfaces, allowing surfaces to be prepared and stained in one day. • • • • • Spread Rate: Resists peeling, blistering, and scuffing Excellent adhesion and durability on new, weathered, previously stained or previously painted surfaces Protects against cracking, splitting, and warping of wood May be applied in temperatures as low as 35°F Can be applied to damp surfaces 200-400 sq. ft. per gallon, porosity and texture dependent Film Thickness*: 4 mils wet; 1.6 mils dry Penetration will vary depending on substrate porosity & water content and the application method used. New wood will typically require less material than older, weathered wood. Older weathered wood is more porous than newer wood. * Product data calculated on White/Tint Base (Z1511) Drying Time (@ 50% R.H.): Note: Drying times are temperature, humidity and film thickness dependant. Colder temperatures, higher humidity, and thicker films will take longer to dry. Recommended Uses To Touch: 1 hour To Recoat: 2 hours Light Foot Traffic: 16 hours Furniture/Heavy Foot Traffic: 24 hours For use on exterior decks, wood siding, pressure-treated wood, rough sawn lumber, trim, fences, railings, outdoor furniture and lattice work. Ideal for decks manufactured from composition materials. Recommended Systems Pratt & Lambert or BAC Universal colorants Bases per sheen: White/Tint, Deep, Neutral Pressure Treated Lumber, Composite Deck Materials ® 2 coats StainShield 100% Acrylic Solid Color Deck Stain Previously Stained or Painted Surfaces ® 1 or 2 coats StainShield 100% Acrylic Solid Color Deck Stain Two coats are recommended for maximum durability. One coat my be sufficient for railings, spindles, and surfaces not subjected to foot traffic. SCAQMD CARB LADCO

Open the catalog to page 1
StainShield® Solid Color Deck Stain - 2

Product Data Sheet StainShield® Solid Color Deck Stain Surface Preparation WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD...

Open the catalog to page 2

All Pratt & Lambert catalogs and technical brochures

  1. allure

    2 Pages

  2. Exterior

    2 Pages

  3. Interior

    2 Pages