Product Data Sheet Technical Data Vehicle: Finish: Volume Solids*: Flat Eggshell Satin Int/Ext Gloss S6700 Series – Flat (Discontinued 2012) S7700 Series – Eggshell S5700 Series – Satin S1100 Series – Interior/Exterior Gloss RedSeal® Interior Oil is a premium alkyd enamel, providing excellent application, hiding and coverage, and a smooth fade resistant finish. • • • • Flat Eggshell Satin Int/Ext Gloss Flash Point: Enamel finish for a long-lasting, hard, washable coating Outstanding durability Excellent flow and leveling Great for cabinets, doors & trim Recommended Uses For use on interior drywall, masonry, plaster, metal, walls, wood, metal and previously painted surfaces. Weight Solids*: Flat Eggshell Satin Int/Ext Gloss Weight/Gallon*: Flat Eggshell Satin Int/Ext Gloss 11.8 lb/gal 11.7 lb/gal 11.6 lb/gal 9.2 lb/gal VOC (less exempt solvents): Flat: VOC: 433 g/L - 3.62 lb/gal as per 40 CFR 59.406 Eggshell: VOC: 366 g/L; 3.05 lb/gal as per 40 CFR 59.406 Satin: VOC: 366 g/L; 3.05 lb/gal as per 40 CFR 59.406 Int/Ext Gloss: VOC: 389 g/L; 3.25 lb/gal as per 40 CFR 59.406 Spread Rate: Recommended Systems 400 sq. ft. per gallon, porosity and texture dependent Film Thickness*: Flat Eggshell Satin Int/Ext Gloss Drywall 1 coat Pratt & Lambert® Drywall Primer 1 or 2 coats RedSeal® Interior Oil @ 4 mils wet; 1.7 mils dry @ 4 mils wet; 2.1 mils dry @ 4 mils wet; 2.1 mils dry @ 4 mils wet; 1.7 mils dry * Product data calculated on: Super One-Coat White (Z8400, Z8500, Masonry (cured 30+ days) ® 1 coat Pratt & Lambert Multi-Purpose Waterborne Primer ® 1 or 2 coats RedSeal Interior Oil Drying Time (@ 77°F, 50% R.H.): Concrete Block ® For a filled effect use Pro-Hide Silver Latex Block Filler ® 1 or 2 coats RedSeal Interior Oil Note: Drying times are temperature, humidity and film thickness dependant. To Touch: To Recoat: Plaster (cured 30+ days) ® 1 coat Pratt & Lambert Multi-Purpose Waterborne Primer ® 1 or 2 coats RedSeal Interior Oil Mineral Spirits Pratt & Lambert or BAC Universal colorants Wood ® 1 coat Pratt & Lambert Multi-Surface Oil Base Primer OR ® Pratt & Lambert Multi-Purpose Waterborne Primer 1 or 2 coats RedSeal® Interior Oil Bases Per Sheen: Super One-Coat White Base 1 Base 2 Base 3 Metal 1 coat Pratt & Lambert® Multi-Purpose Waterborne Primer 1 or 2 coats RedSeal® Interior Oil Previously Painted Surfaces No primer necessary 2 coats RedSeal® Interior Oil Quart, Gallon RedSeal Interior Oil is not compliant in any VOC area.

Product Data Sheet RedSeal® Interior Oil Surface Preparation WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact...