Product Data Sheet Technical Data Vehicle: Finish: Pro-Hide® Silver Interior/Exterior Latex Block Filler Vinyl Acrylic Flash Point: Pro-Hide Silver Interior/Exterior Latex Block Filler is a high hiding, high solids, easy-to-use formulation that primes and fills interior and exterior above grade, unpainted aggregate block, poured-in-place concrete, precast concrete surfaces, and rough masonry in one application. Not for use over existing coatings. • • • Superior moisture resistance Excellent filling characteristics Ideal for resurfacing deteriorated concrete walls and ceilings Weight/Gallon: 13.5 lbs. VOC (less exempt solvents): VOC < 50 g/L – 0.42 lb/gal per 40 CFR 59.406 Spread Rate: 75-125 sq. ft. per gallon, porosity and texture dependent Film Thickness: @ 18 mils wet; 9 mils dry Recommended Uses Shelf Life: Use this product on interior or exterior above-grade unpainted masonry, concrete, cement, and flat surfaced concrete block Drying Time (@ 77°F, 50% R.H., 18 mils wet): Note: Drying times are temperature, humidity and film thickness dependant. Recommended Systems To Touch: To Recoat: -Waterborne -Solventborne Unpainted Aggregate Block, Poured and Precast Concrete: Untopcoated, light service: ® Interior: 1 coat Pro-Hide Silver Int/Ext Latex Block Filler ® Exterior: 2 coats Pratt Pro-Hide Silver Int/Ext Latex Block Filler Topcoated: ® 1 coat Pro-Hide Silver Int/Ext Latex Block Filler ® 1-2 coats Pratt & Lambert Architectural or Industrial Maintenance Coating, including latex and alkyd topcoats, water-based epoxies, solvent-based epoxies, and polyurethanes As of 3/27/13, complies with: OTC ETC SCAQMD CARB LADCO

Product Data Sheet Pro-Hide® Silver Interior/Exterior Latex Block Filler Surface Preparation Z8485 / F8485 WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information...