1. Catalogs
  2. Pratt & Lambert
  3. Fresh - Spec Zero VOC Interior Latex Paint

Fresh - Spec Zero VOC Interior Latex Paint

Fresh - Spec Zero VOC  Interior  Latex Paint

Fresh - Spec Zero VOC Interior Latex Paint

Product catalog summary
Product Overview: Fresh-SpecTM Zero VOC Interior Latex Paint is a premium quality, professional-grade paint designed for use in occupied spaces such as schools, healthcare facilities, commercial repaints, and new constructions. It is GREENGUARD GOLD certified for indoor air quality and offers excellent hide, smooth application, and exceptional touch-up capabilities.
Product Specifications:
  • Available in four finishes: Flat (Z0200 Series), Eggshell (Z0300 Series), Satin (Z0500 Series), and Semi-Gloss (Z0600 Series).
  • Zero VOC applies only to base paint; VOC levels may increase with certain colorants.
  • Aligns with MPI gloss levels 1, 2, 4, and 5.
Recommended Uses: Suitable for drywall, cured plaster, masonry, wood, metal, and previously painted surfaces.
Application Systems:
  • Drywall, Masonry, Plaster, Wood, and Metal: Use Pro-Hide® Gold Interior/Exterior Waterborne Primer followed by 1 or 2 coats of Fresh-SpecTM Interior Latex.
  • Concrete Block: Use Pro-Hide® Silver Latex Block Filler for a filled effect, followed by 1 or 2 coats of Fresh-SpecTM Interior Latex.
Technical Data:
  • Vehicle: Vinyl Acrylic
  • Volume Solids: Flat 42%, Eggshell 42%, Satin 41%, Semi-Gloss 39%
  • Weight Solids: Flat 59%, Eggshell 58%, Satin 54%, Semi-Gloss 51%
  • Spread Rate: 400 sq. ft. per gallon
  • Drying Time: To touch in 1 hour, to recoat in 4 hours
Surface Preparation: Ensure surfaces are free of contaminants. Sand or scrape to remove loose paint and smooth surfaces. Fill cracks and holes with spackling paste. Special care is needed for surfaces with lead-based paint.
Application Instructions:
  • Apply at temperatures above 50°F.
  • Airless Spray: 2000 psi, Tip .017” - .021”.
  • Conventional Spray: Air Pressure 40-60 psi, Fluid Pressure 20 psi.
  • Brush: Nylon/polyester, no reduction recommended.
  • Roller: 1/4”-3/4” nap synthetic, no reduction recommended.
Performance Tips: Clean surfaces thoroughly, prepare substrates uniformly, and use quality sealants for patching and caulking.
Cautions: Protect from freezing, for interior use only, not suitable for horizontal surfaces or areas where water collects.
Clean Up: Use soap and warm water for spills and tools. Flush spray equipment with mineral spirits to prevent rusting.
See more

Catalog excerpts

Fresh - Spec Zero VOC  Interior  Latex Paint-1

PRATT & LAMBERT PAINTS Never compromise- Technical Data Vehicle: Vinyl Acrylic Fresh-Spec Zero VOC* Interior Latex Paint Finish / MPI Gloss Level Z0200 Series - Flat Z0300 Series - Eggshell Z0500 Series - Satin Z0600 Series - Semi-Gloss Fresh-Spec™ Interior Latex Paint is a premium quality, professional Zero VOC* coating. It offers great hide, smooth application, and exceptional touch-up. It is ideal for occupied spaces such as schools and health care facilities, commercial repaints, and new construction. • GREENGUARD GOLD certified for indoor air quality. • Great hide • Excellent brush, roll, and spray application • Smooth, durable finish • Exceptional touch-up • Aligns with MPI gloss levels 1, 2, 4 and 5 *Zero VOC applies only to base paint. VOC level may increase significantly depending on the colorant choice. Zero VOC when tinted with GeoShades colorants. Flash Point: N/A Volume Solids*: Flat Eggshell Satin Semi-Gloss Weight Solids*: Flat Eggshell Satin Semi-Gloss Weight/Gallon*: Flat Eggshell Satin Semi-Gloss VOC (less exempt solvents): VOC 0 g/L - 0 lb/gal as per 40 CFR 59.406 Spread Rate: 400 sq. ft. per gallon, porosity and texture Film Thickness*: Flat Eggshell Satin Semi-Gloss @ 4 mils wet @ 4 mils wet @ 4 mils wet @ 4 mils wet 1.4 mils dry 1.4 mils dry 1.4 mils dry 1.4 mils dry Recommended for drywall, cured plaster, masonry, wood, metal and previously painted surfaces. Reduction: Water Tinting: Universal colorants Sizes: Gallon, 5 Gallon Drywall 1 coat Pro-Hide® Gold Interior/Exterior Waterborne Primer 1 or 2 coats Fresh-Spec™ Interior Latex Masonry (cured 30+ days) 1 coat Pro-Hide® Gold Interior/Exterior Waterborne Primer 1 or 2 coats Fresh-Spec™ Interior Latex SCAQMD ✓ CARB ✓ LADCO ✓ Concrete Block For a filled effect, use 1 coat Pro-Hide® Silver Latex Block Filler 1 or 2 coats Fresh-Spec™ Interior Latex Plaster (cured 30+ days) 1 coat Pro-Hide® Gold Interior/Exterior Waterborne Primer 1 or 2 coats Fresh-Spec™ Interior Latex Wood 1 coat Pro-Hide® Gold Interior/Exterior Waterborne Primer OR Pratt & Lambert® Multi-Surface Oil Base Primer 1 or 2 coats Fresh-Spec™ Interior Latex **Please refer to the MPI Approved Products website for the most current list of approved Pratt & Lambert products. http://www.paintinfo.com/mpi/approved/index.shtml Metal 1 coat Pro-Hide® Gold Interior/Exterior Waterborne Primer 1 or 2 coats Fresh-Spec™ Interior Latex 01/17

 Open the catalog to page 1
Fresh - Spec Zero VOC  Interior  Latex Paint-2

Product Data Sheet Surface Preparation WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority....

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.