1. Catalogs
  2. Pratt & Lambert
  3. Aquanamel Waterborne Alkyd Enamel

Aquanamel Waterborne Alkyd Enamel

Aquanamel Waterborne Alkyd  Enamel

Aquanamel Waterborne Alkyd Enamel

Product catalog summary
Product Overview
AquanamelTM Waterborne Alkyd Enamel is a high-quality coating that combines the ease of waterborne application with the performance of traditional oil-based paints. It is available in Satin, Semi-Gloss, and Gloss finishes and is ideal for interior trim, doors, and cabinets.

Key Features
  • Superb flow and leveling for a smooth finish
  • Hard, durable finish
  • Easy application with brush, roll, or spray
  • Extended open time
  • Soap and water cleanup
  • Low VOC content (<50 g/L)

Recommended Uses
Suitable for interior trim, doors, cabinets, walls, ceilings, drywall, plaster, wood, masonry, metal, and previously painted surfaces.

Application Systems
  • Drywall: 1 coat of Multi-Purpose Waterborne Primer, followed by 1-2 coats of Aquanamel
  • Masonry: 1 coat of Multi-Purpose Waterborne Primer, followed by 1-2 coats of Aquanamel
  • Concrete Block: 1 coat of Pro-Hide® Silver Latex Block Filler, followed by 1-2 coats of Aquanamel
  • Plaster/Wood: 1 coat of Multi-Purpose Waterborne Primer, followed by 1-2 coats of Aquanamel
  • Metal: 1 coat of Multi-Purpose Waterborne Primer, followed by 1-2 coats of Aquanamel

Technical Data
  • Vehicle: Urethane modified alkyd
  • Finish: Satin (25-35 units @ 60°), Semi-Gloss (40-50 units @ 60°), Gloss (>65 units @ 60°)
  • Volume Solids: Satin 32 ± 2%, Semi-Gloss 36 ± 2%, Gloss 35 ± 2%
  • Weight Solids: Satin 50 ± 2%, Semi-Gloss 54 ± 2%, Gloss 51 ± 2%
  • VOC: <50 g/L
  • Spread Rate: 400 sq. ft. per gallon
  • Drying Time: To touch in 1-2 hours, recoat in 4 hours

Surface Preparation
Ensure surfaces are clean, dry, and free from contaminants. Sand glossy surfaces and fill cracks and holes. Special care is needed for surfaces with lead-based paint.

Application Instructions
  • Temperature: Apply above 50°F
  • Airless Spray: 2000 psi, tip size .013” - .017”
  • Brush: Nylon/polyester
  • Roller: 1/4" – 1/2" woven cover

Performance Tips
  • Thoroughly clean and prepare surfaces
  • Patch and fill as necessary
  • Use quality caulks and sealants

Cautions
  • Protect from freezing
  • For interior use only

Clean Up
Use soap and warm water for cleaning spills and tools. Flush spray equipment with mineral spirits to prevent rusting.
See more

Catalog excerpts

Aquanamel Waterborne Alkyd  Enamel-1

Product Data Sheet PRATT & LAMBERT PAINTS - Never compromise-Vehicle: Technical Data Urethane modified alkyd Aquanamel Waterborne Alkyd Enamel Z0700 Series - Satin Z0800 Series - Semi-Gloss Z0900 Series - Gloss Flash Point: N/A Volume Solids*: Satin 32 ± 2% Aquanamel™ Waterborne Alkyd Enamel is a premium quality Weight Solids*: Satin 50 ± 2% coating that offers superb flow and leveling and a smooth, durable Semi-Gloss 54 ± 2% finish. It provides the convenience and ease of use of a waterborne Gloss 51 ± 2% coating with the application and performance of a traditional oil-based paint. It is easy to apply and cleans up with soap and water. Weight/Gallon*: Satin 11 lbs. It is ideal for use on interior trim, doors and cabinets. Semi-Gloss 11.2 lbs. • Superb flow & leveling for a smooth, uniform finish • Cures to a hard, durable finish • Excellent brush, roll, and spray application • Extended open time • Cleans up with soap & water - no solvents required • Low VOC - less than 50 g/L Recommended Uses Recommended for use on interior trim, doors, cabinets, walls, ceilings, drywall, plaster, wood, masonry, metal and previously painted surfaces Spread Rate: 400 sq. ft. per gallon Film Thickness: Satin @ 4 mils wet; 1.4 mils dry Semi-Gloss @ 4 mils wet; 1.4 mils dry Gloss @ 4 mils wet; 1.4 mils dry * Product data calculated on Bright White / Base Drying Time (@ 77°F, 50% R.H.): Note: Drying times are temperature, humidity, and film thickness dependent. To Touch: 1-2 hours Bases/Colors Per Finish: Sa Super One-Coat® White v Bright White / Base v Pastel Base v Deep Base v Neutral Base v Recommended Systems Drywall: 1 coat Pratt & Lambert® Multi-Purpose Waterborne Primer 1-2 coats Aquanamel™ Waterborne Alkyd Enamel Masonry (cured 30+ days): 1 coat Pratt & Lambert® Multi-Purpose Waterborne Primer 1-2 coats Aquanamel™ Waterborne Alkyd Enamel Concrete Block: For a filled effect use 1 coat Pro-Hide® Silver Latex Block Filler 1-2 coats Aquanamel™ Waterborne Alkyd Enamel Plaster (cured 30+ days), Wood: 1 coat Pratt & Lambert® Multi-Purpose Waterborne Primer 1-2 coats Aquanamel™ Waterborne Alkyd Enamel Metal 1 coat Pratt & Lambert® Multi-Purpose Waterborne Primer 1-2 coats Aquanamel™ Waterborne Alkyd Enamel Tinting: Universal colorants Sizes: Quart, Gallon

 Open the catalog to page 1
Aquanamel Waterborne Alkyd  Enamel-2

Product Data Sheet Surface Preparation WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority....

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.