Product Data Sheet Technical Data Vehicle: Finish: Gloss or Semi-Gloss (60-75 units @ 60˚) Flash Point: Acrylic Waterborne Epoxy Acrylic Epoxy Volume Solids*: 37 ± 2% Weight Solids*: 46 ± 2% Z7000 Series – Part A Z7015 – Gloss Activator – Part B Z7025 – Semi-Gloss Activator – Part B Weight/Gallon*: 9.7 lb/gal *Based on White/Base 1 Acrylic Waterborne Epoxy is a two-component, water based catalyzed coating available in semi-gloss & gloss. It is designed for high performance use in industrial & commercial environments. It offers outstanding corrosion and chemical resistance and provides a tile-like wall coating ideal for industrial/institutional high maintenance areas. • • • • • VOC (less exempt solvents): White/Base 1: VOC: 129 g/L – 1.08 lb/gal as per 40 CFR 59.406 Deep/Base 2: VOC: 163 g/L – 1.39 lb/gal as per 40 CFR 59.406 Corrosion and chemical resistant Impact and abrasion resistant Flash rust resistant Excellent adhesion Good color and gloss retention Recommended Film Thickness: 6.5 – 8.0 mils wet 2.5 – 3.0 mils dry Spread Rate: Recommended Uses Drying Time (@ 8 mils wet, 50% R.H.): Note: Drying times are temperature, humidity and film thickness dependant. 50°F 77°F 120°F To Touch: 2 hrs 1 hrs 20 min Tack Free: 4 hrs 2 hrs 30 min Min. Recoat: 28 hrs 18-24 hrs 4 hrs To Cure: 20 days 14 days 7 days Use this product over prepared surfaces of steel, iron, aluminum, galvanized metal, concrete block, masonry, wood and drywall. Recommended Systems Steel, Iron ® 1 coat Pratt & Lambert Universal HP Acrylic Primer ® 1-2 coats Pratt & Lambert Acrylic Waterborne Epoxy If maximum recoat time is exceeded, abrade surface before recoating. 50°F Aluminum, Galvanized Metal ® 1 coat Pratt & Lambert Universal HP Acrylic Primer (not required) ® 2 coats Pratt & Lambert Acrylic Waterborne Epoxy Pot Life: 48 hrs Sweat-in Time: 60 min Tinting: Tint Part A with Pratt & Lambert Colorants or Universal BAC Colorants. Mix minimum 5 minutes on mechanical shaker. Concrete Block ® 1 coat Pratt & Lambert Acrylic Block Filler ® 2 coats Pratt & Lambert Acrylic Waterborne Epoxy Masonry (smooth) ® 2 coats Pratt & Lambert Acrylic Waterborne Epoxy NOTE: Weathered, soft or porous masonry must be treated with Pro® Hide Gold Masonry Surface Conditioner Part A: 1 Gallon, 4 Gallon; Part B: 1 quart, 1 Gallon Shelf Life: Part A: 36 months, unopened; Part B: 24 months, unopened Wood - Interior ® 1 coat Pratt & Lambert Multi-Purpose Waterborne Primer ® 2 coats Pratt & Lambert Acrylic Waterborne Epoxy As of 4/23/13, complies with: OTC EC SCAQMD CARB LADCO Wood - Exterior ® 1 coat Pratt & Lambert Multi-Surface Oil Primer ® 2 coats Pratt & Lambert Acrylic Waterborne Epoxy Drywall ® 1 coat Pratt & Lambert Drywall Primer ® 2 coats Pratt & Lambert Acrylic Waterborne Epoxy 3

Product Data Sheet Acrylic Waterborne Epoxy Surface Preparation WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424LEAD (in US) or contact...