Acrylic Waterborne DTM
2Pages

Product Data Sheet Technical Data Vehicle: Finish: Satin (10-20 units @ 85˚) Semi-Gloss (35-50 units @ 60˚) Gloss (70+ units @ 60˚) Acrylic Waterborne DTM Z6600 Series – Satin Z6700 Series – Semi-Gloss Z6800 Series – Gloss Flash Point: Volume Solids: Satin: 37 ± 2% Semi-Gloss: 36 ± 2% Gloss: 36 ± 2% Weight Solids: Acrylic Waterborne DTM is an interior/exterior, single component, corrosion-resistant waterborne enamel designed for light to moderate duty industrial and commercial applications. Use for new construction or maintenance work. • • • • • • Early rust and moisture resistance Flash rust resistant Corrosion and chemical resistant Fast dry Single component Interior/exterior use Satin: 45 ± 2% Semi-Gloss: 50 ± 2% Gloss: 44 ± 2% Weight/Gallon: Satin: 9.6 lb/gal Semi-Gloss: 9.5 lb/gal Gloss: 9.5 lb/gal VOC (less exempt solvents): VOC < 50 g/L – 0.42 lb/gal as per 40 CFR 59.406 Recommended Film Thickness: 6.0 - 12.0 mils wet 2.5 - 4.0 mils dry Use this product on properly prepared surfaces of steel, iron, aluminum, galvanized metal, concrete block, masonry, wood, drywall, pre-finished siding and previously painted surfaces. Recommended Systems Steel – with primer ® 1 coat Pratt & Lambert Universal HP Acrylic Primer ® 2 coats Pratt & Lambert Acrylic Waterborne DTM Steel - unprimed ® 2 coats Pratt & Lambert Acrylic Waterborne DTM – White/Base 1 or custom tints from White/Base 1 only. Deeper colors require a primer. (Note that application over unprimed bare steel may cause pinpoint rusting) Aluminum, Galvanized Steel ® 1 coat Pratt & Lambert Universal HP Acrylic Primer ® 2 coats Pratt & Lambert Acrylic Waterborne DTM Pre-Finished Siding (Baked-on Finishes): ® 1 coat Pratt & Lambert Acrylic Waterborne Bonding Primer ® 2 coats Pratt & Lambert Acrylic Waterborne DTM Concrete, Masonry ® 1 coat Pratt & Lambert Multi-Purpose Waterborne Primer ® 2 coats Pratt & Lambert Acrylic Waterborne DTM Concrete Block ® 1 coat Pratt & Lambert Acrylic Block Filler ® 2 coats Pratt & Lambert Acrylic Waterborne DTM Wood ® 1 coat Pratt & Lambert Multi-Purpose Waterborne Primer ® 2 coats Pratt & Lambert Acrylic Waterborne DTM Drywall, Wallboard ® 1 coat Pratt & Lambert Drywall Primer ® 2 coats Pratt & Lambert Acrylic Waterborne DTM Previously Painted Surfaces ® 2/14 2 coats Pratt & Lambert Acrylic Waterborne DTM Spread Rate: Shelf Life: Recommended Uses Apply by airless or conventional spray, brush or roller Drying Time (@ 7 mils wet, 50% R.H.): Note: Drying times are temperature, humidity and film thickness dependant. 50°F 77°F 120°F To Touch: 1 hr 30 min 5 min Tack Free: 8 hrs 5 hrs 15 min To Recoat: 8 hrs 5 hrs 15 min To Cure: 30 days 30 days 30 days Universal Colorants FOR INDUSTRIAL USE ONLY As of 10/22/13, complies with: OTC EC SCAQMD CARB LADCO MPI: Z6700 Series—141, 147, 153 Z6800 Series—114, 148, 154 **Please refer to the MPI Approved Products website for the most current list of approved Pratt & Lambert products. http://www.paintinfo.com/mpi/approved/ind

Product Data Sheet Surface Preparation WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424LEAD (in US) or contact your local health...