PORTALP - Automatic Doors Diva L CLEAN
4Pages

Sliding Door with Controlled Leakage Flow CONTROLLED LEAKAGE FLOW AT AIR PRESSURE ERGONOMY LINKED TO CLEANING AND DECONTAMINATION REQUIREMENTS. HOSPITAL MEDICAL RESEARCH PHARMACEUTICAL INDUSTRY CHEMISTRY LABORATORY INDUSTRIAL CLEAN ROOM ELECTRONICS The DIVA L CLEAN sliding door is designed to respond to the requirements of the most advanced technological sectors for which a controlled atmospheric environment is necessary. This door range is dedicated to sites where air permeability must be controlled : hospitals, clean rooms, laboratories…

DIVA L CLEAN DIVA L CLEAN proposes specific technical solutions, and provides an enormous usage comfort. People transporting sensitive materials or pushing a carriage appreciate a wide automatic opening. Doors opening without contact or handle manipulations allow respecting stringent hygienic rules. Adjusting leaves opening and closing speeds limits contamination exchanges between two areas. Leakage flow control The leaf’s tightness is ensured by special rubber seals which form a true barrier against the passage of air. The G25 vertical profiles of the frames are equipped at the rear with a...

Air permeability test Test results according to NF EN 1026 standard specifications. G25 glazed leaf The cover is equipped with a seal in its lower and upper parts conferring on the assembly a perfect tightness against splashings. 110 mm Ergonomic covers with smooth, rounded shapes prevent dust from accumulating and facilitate cleaning and decontamination. The low cover is hinged on langes. It can be held open during cleaning and maintenance operations. Easy to clean and maintain Opened cover To find the best solution for your project, we offer a wide choice of control and detection and...

DIVA L CLEAN CHARACTERISTICS MECHANICS Installation Surface applied Casing (H x D) Leaves type Min/max passage width PERFORMANCES Leaf weight max with IME (Emergency exits) 1 x 105 kg Opening speed Closing speed Hold open time Opening force Closing force ELECTRICAL ENVIRONMENT Power supply Mains 50-60 Hz, 230 V ±10 % with earth Average absorbed power Motor voltage / Emergency battery Relative humidity Operating temperature -20°C/+60°C - Emergency exits doors according to EN16005 :+5°C/+40°C Electromagnetic compatibility : directive 2004/108/CE, electrical safety - low tension : directive...