Poresta@ sound-proofing according to DIN 4109 / VDI 4100
8Pages

{{requestButtons}}

Catalog excerpts

Poresta@ sound-proofing according to DIN 4109 / VDI 4100 - 1

Sanitary engineering. Simple. Smart. Poresta® sound-proofing Poresta® floor-level shower systems and Poresta® supporting frames

Open the catalog to page 1
Poresta@ sound-proofing according to DIN 4109 / VDI 4100 - 2

Poresta® sound-proofing for Poresta® floor-level shower systems and Poresta® supporting frames Our systems are tested for practical use Some of the sound pressure levels that we have measured in our systems installed in a room requiring sound-proofing are so low that they can barely be perceived by the human ear. Noise measurements on our systems are always carried out in installations that mirror authentic situations. This entails the following for our floorlevel shower systems: As a comparison: approximately 30 dB(A), a figure that corresponds to the minimum requirement stipulated by DIN...

Open the catalog to page 2
Poresta@ sound-proofing according to DIN 4109 / VDI 4100 - 3

Poresta® BF KMK installed with the Poresta® sound-proofing sets, BEDS Our systems are tested for practical use: Poresta® sound-proofing set BEDS Water splash noise Improved impact noise Item no. 18.800.007, comprising: Poresta® noise absorption mats, 5 mm, foil, boundary insulation strips, soundproofing mat, adhesive strips (showers measuring up to 1200 x 1200 mm) Measured values according to test report P-BA 117-1/2007 plus as options for large shower systems: Poresta® noise absorption mat, 5 mm, set with 3 pieces, item no. 18.800.011 measured with standard impact noise hammer Item no....

Open the catalog to page 3
Poresta@ sound-proofing according to DIN 4109 / VDI 4100 - 4

Poresta® BF 70 installed with the Poresta® sound-proofing sets, BEDS Our systems are tested for practical use: Poresta® sound-proofing set BEDS Water splash noise Item no. 18.800.007, comprising: Poresta® noise absorption mats, 5 mm, foil, boundary insulation strips, soundproofing mat, adhesive strips (showers measuring up to 1200 x 1200 mm) Measured values according to test report P-BA 100-1/2009 Poresta® noise absorption mat, 5 mm, glued on the foundation boundary insulation strip tiles tile adhesive Basement, rear* = 26 dB(A) Lower level, front = 31 dB(A) Ground level, rear = 28 dB(A)...

Open the catalog to page 4
Poresta@ sound-proofing according to DIN 4109 / VDI 4100 - 5

Poresta® Slot installed with the Poresta® sound-proofing sets, BEDS Our systems are tested for practical use: Poresta® sound-proofing set BEDS Water splash noise Improved impact noise Item no. 18.800.010, comprising: Poresta® noise absorption mats, 17 mm, foil, boundary insulation strips, sound-proofing mat, adhesive strips Measured values according to test report P-BA 106-1/2011 in combination with technical declaration***** Poresta® formwork elements (showers measuring up to 1200 x 1200 mm) and also required: Filling compound, item no. 18.200.234 plus as options for large shower systems:...

Open the catalog to page 5
Poresta@ sound-proofing according to DIN 4109 / VDI 4100 - 6

Poresta® Slot S installed with the Poresta® sound-proofing sets, BEDS Our systems are tested for practical use: Poresta® sound-proofing set BEDS Water splash noise Improved impact noise Item no. 18.800.010, comprising: Poresta® noise absorption mats, 17 mm, foil, boundary insulation strips, sound-proofing mat, adhesive strips Measured values according to test report P-BA 106-1/2011 Poresta® formwork elements (showers measuring up to 1200 x 1200 mm) Basement, rear* = 12 dB(A) Lower level, front = 16 dB(A) Ground level, rear = 18 dB(A) and also required: Filling compound, item no. 18.200.234...

Open the catalog to page 6
Poresta@ sound-proofing according to DIN 4109 / VDI 4100 - 7

Poresta® supporting frames Poresta® shower system supporting frames installed for different sound-proofing requirements installed for different sound-proofing requirements Installation method Steel baths Acrylic baths Installation on rough floor Standard retail mixer tap with quiet water jet, water flow rate ≤ 0.2 l/s Supporting frame installation with 2-component construction foam Acrylic shower systems Installation on rough floor Standard retail mixer tap with quiet water jet, water flow rate ≤ 0.2 l/s Measured values according to test report P-BA 155-1/1995 Supporting frame installation...

Open the catalog to page 7
Poresta@ sound-proofing according to DIN 4109 / VDI 4100 - 8

France VOGA SARL. Belgium Ipma Belux nv/sa T +32 (0)3 827 61 84 | F +32 (0)3,8276043 ipma-belux@skynet.be | www.poresta.com Great Britain Bathroom Engineering T +44 (0)1761-241133 | F +44 (0)1761-241134 sales@bathroom-engineering.co.uk | www.poresta.com Netherlands Hamers & Kesber T +31 (0)356566888 | F +31 (0)355257006 info@hamersenkesber.nl | www.poresta.com Other countries poresta systems GmbH | Illbruckstraße 1 | 34537 Bad Wildungen | Germany | T +49 5621. 801-0 | F +49 5621. 801-278 | info-de@poresta.com | www.poresta.com Subject to technical changes. Not all products are available in...

Open the catalog to page 8

All Poresta systems catalogs and technical brochures

Archived catalogs