1. Catalogs
  2. Polyrey
  3. Technical data sheet - SIGNATURE
video corpo

Technical data sheet - SIGNATURE

Technical data sheet - SIGNATURE
1 / 16 PagesView full catalog

Technical data sheet - SIGNATURE

Product catalog summary
Overview
This document provides comprehensive details on Polyrey's High Pressure Laminate (HPL) and Compact HPL products, specifically from the Signature Library collection. It covers specifications, applications, certifications, and handling instructions.
Specifications
HPL panels are available in thicknesses of 0.9 mm and 1 mm (fire retardant), while Compact HPL panels range from 4 mm to 12.5 mm. These panels are resistant to abrasion, impact, heat up to 180°C, and are machinable throughout their thickness. They are hygienic, easy to clean, suitable for food contact, and antibacterial.
Material Composition
The panels consist of multiple layers of paper impregnated with thermosetting resin, pressed at high temperatures and pressures to create a non-porous, homogeneous surface. High-resolution digital printing is used for image reproduction.
Certifications and Standards
The products comply with EN 438 and ISO 4586 standards and can be certified as PEFC™ or FSC® upon request. Fire behavior is classified under NFP 92-501 and EN 13501-1 standards.
Applications
Suitable for interior use in both horizontal and vertical applications, such as wall cladding, furniture, table tops, doors, and splashbacks. Not recommended for extremely humid environments like spas or saunas.
Handling and Storage
Panels should be stored flat and protected from moisture and mechanical damage. If stored vertically, they should be inclined at 80° with full support. Protective film should be removed within six months of delivery.
Installation Procedures
Panels should be cut and aligned individually for decor continuity. They should be conditioned for at least 48 hours before processing. Various adhesives can be used, and cold pressing is recommended. Panels are not postformable but can be used for curved surfaces with a limited bending radius.
Maintenance and Cleaning
HPL panels require minimal maintenance and can be cleaned with mild soap or detergent. Avoid abrasive cleaners, especially on extra-matte and glossy surfaces.
Environmental and Health Aspects
Produced in ISO-certified facilities, the panels comply with formaldehyde emission standards and are suitable for food contact. They contain recycled content and comply with REACH regulations.
Waste Management
Panels can be disposed of in compliance with waste management regulations and are suitable for thermal recycling.
Technical Information
Includes detailed technical specifications, such as physical, mechanical, and surface properties, tested according to EN438 requirements.
Certifications and Testing
Panels have various certifications, including fire ratings and GREENGUARD GOLD certification for low chemical emissions.
See more

Catalog excerpts

Technical data sheet - SIGNATURE-1

Fiche Technique Technical Datasheet STRATIFIÉ HPL • STRATIFIE COMPACT HPL signature  signature  library® Hygiène - Hygienic HIGH PRESSURE LAMINATE • COMPACT HPL Nettoyage facile Easy to clean Apte au contact alimentaire Suitable for food contact Antibactérien Antibacterial Abrasion Abrasion Chocs Impact Chaleur jusqu’à 180 °C Heat up to 180 °C Usinable dans la masse* Machinable throughout its thickness* Fissuration Cracking Produits chimiques Chemical products Rayures Scratches Lumière artificielle Artificial light Stratifié HPL High Pressure Laminate Stratifié Compact HPL Compact HPL Une bibliothèque de décors à votre disposition Des centaines de décors bois, minéraux, motifs… en plus de la Collection Agencement Intérieur, régulièrement mis à jour pour rester au cœur des tendances ! A library of decors at your disposal Hundreds of decors including wood, mineral, patterns and more... in addition to the Interior Design Collection which is regularly updated to reflect current trends! * en stratifié Compact HPL / in Compact HPL ASSOCIER LES MOTIFS ET LES UNIS Profitez de la correspondance couleur (uniquement sur les Motifs) pour des associations avec les unis de la Collection Agencement intérieur **. Modifiez la colorimétrie des décors Signature Library et recevez un prototype pour confirmer votre choix. COMBINE PATTERNS AND PLAIN COLOURS Use our colour matching (for patterns only) to coordinate with the plain colours in the Interior Design Collection**. Change the colour scheme of the Signature Library decors and order a prototype to confirm your choice. ** Un écart de teinte peut exister. Demandez un échantillon pour valider votre choix. / Difference in color may exist. Request a sample to confirm your choice. 1/16 - Edition 10/2021 - FR-EN - © Polyrey. Tous droits réservés. Sous réserve de modifications, nous consulter - All rights reserved. Subj

 Open the catalog to page 1
Technical data sheet - SIGNATURE-2

signature library® Structures Finishes Décors Decors Produits Products Formats & applications Stratifié HPL High Pressure Laminate Stratifié Compact HPL Compact HPL Sizes & applications High Pressure Laminate FORMATS PANNEAUX : 215 × 97 • 245 × 124 • 305 × 130 • 305 × 132 cm FORMATS UTILES*** : 213 × 95 • 243 × 122 • 305 × 130 cm ÉPAISSEURS : 0,9 • 1 mm (ignifuge) PANEL SIZES : 215 × 97 • 245 × 124 • 305 × 130 • 305 × 132 cm USABLE AREA*** : 213 × 95 • 243 × 122 • 305 × 130 cm THICKNESSES : 0,9 • 1 mm (fire retardant) Stratifié Compact Application murale, mobilier, plateau de table, porte, crédence…...

 Open the catalog to page 2
Technical data sheet - SIGNATURE-3

Fiche Technique Technical Datasheet 1 DESCRIPTION ET COMPOSITION DES MATÉRIAUX Les Stratifiés HPL et les Stratifiés Compact HPL Signature Library sont testés selon les exigences de la norme EN 438 et ISO 4586. Les panneaux Signature Library sont composés de plusieurs couches de papier (60-70%) imprégnées d’une résine thermodurcissable (30-40%) ; pressées à une température élevée (≥ 120 °C) et avec une forte pression (≥ 5 MPa), qui confèrent au panneau un caractère non-poreux et homogène (densité ≥ 1,35 g/cm³) avec la finition de surface désirée. Contrairement au Stratifié HPL standard et au Stratifié...

 Open the catalog to page 3
Technical data sheet - SIGNATURE-4

Fiche Technique Technical Datasheet 2 DONNÉES TECHNIQUES STRATIFIÉ HPL SIGNATURE LIBRARY STRATIFIÉ COMPACT HPL SIGNATURE LIBRARY Standard Testé selon les exigences EN438 CARACTÉRISTIQUES Masse volumique UNITÉ Propriétés physiques et dimensionnelles g/cm3 ≥ 1,35 Tolérance sur longueur et largeur Tolérance sur rectitude des bords Stabilité dimensionnelle à température élevée • Sens longitudinal • Sens transversal Propriétés mécaniques Module de flexion Résistance en flexion Résistance à l’eau bouillante • Augmentation de la masse • Augmentation d'épaisseur • Aspect* Résistance au choc d’une bille...

 Open the catalog to page 4
Technical data sheet - SIGNATURE-5

Fiche Technique Technical Datasheet 3 CERTIFICATIONS ET RAPPORTS D’ESSAIS STRATIFIÉ HPL SIGNATURE LIBRARY STRATIFIÉ COMPACT HPL SIGNATURE LIBRARY Testé selon les exigences EN438 CARACTÉRISTIQUES ÉPAISSEUR NORME Pouvoir calorifique supérieur Qualités sanitaires et environnementales Contact alimentaire Dégagement de formaldéhyde Émissions de substances volatiles Comportement antibactérien Apte Classement A (scenario mur) / A+ (scenario porte) GREENGUARD GOLD * 4 mm : HPL contrecollé sur support standard ou ignifuge ** HPL contrecollé sur support ignifuge ≥ 12 mm *** E1: équivalent a l’appellation...

 Open the catalog to page 5
Technical data sheet - SIGNATURE-6

Fiche Technique Technical Datasheet 6 Les panneaux de Stratifiés HPL et les Stratifiés Compact HPL Signature Library sont disponibles avec ou sans bords perdus, selon le type de décor : 1 / Les décors « avec répétition » offrent la possibilité de reproduire le décor sur la totalité de la largeur de l’application , sans discontinuité de motif. Sur ces décors, un bord perdu a été prévu dans la largeur du panneau pour réaliser une connexion précise et optimisée entre deux panneaux. Ces décors sont au format 3050 x 1320 mm avec un bord perdu de 20 mm pour assurer un format utile de 3050 x 1300 mm....

 Open the catalog to page 6
Technical data sheet - SIGNATURE-7

Fiche Technique Technical Datasheet 6 6 - 2 Découper et raccorder des panneaux avec des bords perdus Pour une pose optimale , il faut veiller à la découpe et au raccordement des panneaux avec un décor avec répétition. Vous devez assurer la continuité du motif des panneaux pour l’habillage mural et examiner chaque panneau individuellement. C’est pourquoi chaque panneau doit être traité et usiné séparément. Scier ou découper les panneaux en pile n’est pas possible. 1 / Identifier le motif et les zones de recouvrement entre les panneaux pour s’assurer de la continuité du décor 2 / Identifier les...

 Open the catalog to page 7
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.