video corpo cad

Polysol IPO
4Pages

{{requestButtons}}

Catalog excerpts

Polysol IPO - 1

POLYSOL IPO 100 - IPO 150 POLYSOL IPO 200 - IPO 250 SINTERED POLYSTYRENE FOAM POLYSOL IPO is an insulating system obtained through the hot bonding of a smooth or mineral-coated plastomeric waterproofing membrane reinforced with glass fibre or non-woven polyester fabric to strips of sintered polystyrene foam. Guaranteed Quality UNI ISO 9001 and UNI ISO 14001 Polyglass is a member of Green Building Council Product in compliance with European Standards Bituminous membrane polymeric matrix ageing control POLYSOL INSULATING SYSTEMS

Open the catalog to page 1
Polysol IPO - 2

PRODUCT DESCRIPTION POLYSOL IPO is an insulating system obtained through the hot bonding of a smooth or mineral-coated plastomeric waterproofing membrane reinforced with glass fibre or non-woven polyester fabric to strips of sintered polystyrene foam. This system offers excellent performance in terms of thermal insulating. THERMAL INSULATING DESCRIPTION Sintered polystyrene foam panels extruded from a molten and expanded thermoplastic mass in blocks of various thickness are cut into 50 mm strips. BONDED MEMBRANE DESCRIPTION Plastomeric waterproofing membrane made of a distilled...

Open the catalog to page 2
Polysol IPO - 3

For proper design, the values of AD should be increased as reported by the UNI EN ISO 10456. Materials and products for the building. Properties humidity. Tabulated values of project and procedures for the establishment of technical standards and declared the project. FLAT ROOF WITH LIMITED ACCESS INDUSTRIAL SAWTOOTH ROOFS TECHNICAL CHARACTERISTICS OF THE WATERPROOFING MEMBRANE EN STANDARD CURVED ROOFS PITCHED ROOFS TECHNICAL CHARACTERISTICS OF THE INSULATING SYSTEM TECHNICAL CHARACTERISTICS

Open the catalog to page 3
Polysol IPO - 4

Remove the insulating system from its package. 2 Position the roll over the vapour barrier and torch it lightly for the adhesion of the system. 3 Fix the overlap and weld them. 4 Position the second roll. 5 / 6 Lightly torch the side laps. 7 Cut the insulating system for the insertion of the breather pipe (beneath the vapour barrier). 8 / 9 After the breather pipe has been inserted, make the other details necessary. POLYSOL INSULATING SYSTEMS APPLICATION METHOD POLYGLASS SPA reserves the right to make any and all modifications required for the ongoing perfection of the product without...

Open the catalog to page 4

All Polyglass Spa catalogs and technical brochures

  1. SONIC

    24 Pages

  2. Polyprimer

    2 Pages

  3. Acriplast

    2 Pages

  4. Flexo Light

    6 Pages

  5. Elastolight

    6 Pages