video corpo cad

Polysol IP 35 V
4Pages

{{requestButtons}}

Catalog excerpts

Polysol IP 35 V - 1

POLYSOL IP 35 V is an insulating system obtained through the hot bonding of a smooth or mineral-coated plastomeric waterproofing membrane reinforced with glass fibre or non-woven polyester fabric to strips or sheets of stiff polyurethane foam. Guaranteed Quality UNI EN ISO 9001:2008 and UNI EN ISO 14001:2004 Bituminous membrane polymeric matrix ageing control Product in compliance with European Standards POLYSOL INSULATING SYSTEMS Manufacturers of Bitumen Distillate Polymer Membranes Polyglass is a member of Green Building Council

Open the catalog to page 1
Polysol IP 35 V - 2

PRODUCT DESCRIPTION POLYSOL IP 35 V is an insulating system obtained through the hot bonding of a smooth or mineral-coated plastomeric waterproofing membrane reinforced with glass fibre or non-woven polyester fabric to strips or sheets of stiff polyurethane foam. This system offers excellent performance in terms of thermal insulating. THERMAL INSULATING DESCRIPTION Stiff polyurethane foam panels with elevated density made in continuous lamination and faced with flexible support on both sides are cut into 50 mm wide strips. The POLYSOL IP 35 V panel is covered with a bitumencoated or...

Open the catalog to page 2
Polysol IP 35 V - 3

For proper design, the values of Ad should be increased as reported by the UNI EN ISO 10456. Materials and products for the building. Properties humidity. Tabulated values of project and procedures for the establishment of technical standards and declared the project. [TECHNICAL CHARACTERISTICS OF THE WATERPROl TECHNICAL CHARACTERISTICS AVAILABLE COLOURS

Open the catalog to page 3
Polysol IP 35 V - 4

Remove the insulating system from its package. Position the roll over the vapour barrier and torch it lightly for the adhesion of the system. Fix the overlap and weld them. 3 Position the second roll. 4 5 / 6 Lightly torch the side laps. Cut the insulating system for the insertion of the breather pipe (beneath the vapour barrier). 7 8 / 9 After the breather pipe has been inserted, make the other details necessary. 2 POLYSOL INSULATING SYSTEMS APPLICATION METHOD Rev. 1/14 POLYGLASS SPA reserves the right to make any and all modifications required for the ongoing perfection of the product...

Open the catalog to page 4

All Polyglass Spa catalogs and technical brochures

  1. Polysol IPO

    4 Pages

  2. SONIC

    24 Pages

  3. Polyprimer

    2 Pages

  4. Acriplast

    2 Pages

  5. Flexo Light

    6 Pages

  6. Elastolight

    6 Pages