POLYSHIELD TS 4 POLYSHIELD TS 4 mineral POLYSHIELD TS 4 and POLYSHIELD TS 4 MINERAL are plastomeric waterproofing membranes with outstanding performance indicated for surfaces subject to extreme stress. Guaranteed Quality UNI EN ISO 9001:2008 and UNI EN ISO 14001:2004 Product in compliance with European Standards Polyglass is a member of Green Building Council All year membranes Lateral and endlap sealing strips WATERPROOFING MEMBRANES COLD FLEXIBILITY Easily flamed non-stick polyethylene film Bituminous membrane polymeric matrix ageing control. PROFESSIONAL LINE

Technical Description POLYSHIELD TS 4 and POLYSHIELD TS 4 MINERAL are plastomeric waterproofing membranes with outstanding performance, made of a latest generation distilled bitumen-based compound modified with POLYPROPYLENE and continuous thread non-woven polyester fabric with elevated basic weight reinforced and stabilized by longitudinal glass fibre. The special type of compound and the elevated mechanical characteristics of the fabric (excellent elongation, remarkable tensile strength) suit these membranes to the heaviest use. The compound’s special formula grants unique flexibility also...

UNIT OF MEASURE m m mm/10 m mm kg/m2 kPa % Euroclass N/50 mm N/50 mm NOMINAL VALUES 10 (-1%) 1 (-1%) Exceeds 4 (-0,2) NPD Exceeds NPD FRoof F NPD 650/450 (-20%) NOMINAL VALUES 10 (-1%) 1 (-1%) Exceeds 4 (-0,2)* NPD Exceeds NPD FRoof F NPD 650/450 (-20%) * Thickness on lapping strip Thickness and weight parameters are indicative only for Italian market. In compliance with EN 13707 product standards (layers for roofing). DIMENSIONS – PACKAGING THICKNESS mm POLYSHIELD TS 4 POLYSHIELD TS 4 MINERAL (Grey) POLYSHIELD TS 4 MINERAL (Other colours) * Thickness on selvedge AVAILABLE COLOURS Upperside protected...

Treat the area to be waterproofed with bituminous primer (POLYPRIMER HP 45 Professional). Position the “Bordangolo” near the horizontal-vertical joint. Completely strip away the product identification tape. In the colder months, we recommend heating up the roll of membrane before applying it. Position and apply the sheet by flaming its bottom surface. Pull the sheet up to a certain height against vertical surfaces. Apply the second sheet with adequate overlapping. Lay the second layer by overlapping. Do not cross the sheets. Roll the overlapping areas using the special pressing roller. Example...