FLEXO S6 PREMIUM FLEXO S6 PREMIUM Mineral FLEXO S6 PREMIUM and FLEXO S6 PREMIUM Mineral are high performance prefabricated waterproofing membranes, made of a special compound of distilled bitumen and elastomeric resin (SBS), and reinforced with a performing polyester internal carrier. Guaranteed Quality UNI EN ISO 9001:2008 and UNI EN ISO 14001:2004 Product in compliance with European Standards Polyglass is a member of Green Building Council Bituminous membrane polymeric matrix ageing control All year membranes Lateral and endlap sealing strips WATERPROOFING MEMBRANES COLD FLEXIBILITY Easily flamed non-stick polyethylene film Manufacturers of Bitumen Distillate Polymer Membranes

TECHNICAL DESCRIPTION FLEXO S6 PREMIUM and FLEXO S6 PREMIUM MINERAL are high performance prefabricated elastomeric waterproofing membranes, made of a special compound of distilled bitumen and a highly flexible reconstituted elastomeric thermoplastic resin (SBS) with a reinforcement made of non-woven polyester filament.s This particular reinforcement, besides being rot resistant, gives the membrane excellent mechanical characteristics, elongation qualities and higher puncturing resistance. The special elastomeric compound guarantees excellent flexibility even at low temperatures. The advanced...

NOMINAL VALUES ≥10 ≥1 Pass NPD 4,5 - 5 (±5%) Pass FLEXO S6 PREMIUM MINERAL NOMINAL VALUES ≥10 ≥1 Pass 3 - 4 (±0,2) NPD Pass TECHNICAL CHARACTERISTICS LENGTH WIDTH STRAIGHTNESS THICKNESS MASS PER UNIT AREA WATERTIGHTNESS WATERTIGHTNESS AGAINST ARTIFICIAL AGEING WATERTIGHTNESS AGAINST CHEMICAL WATERTIGHTNESS AFTER STRETCHING EXTERNAL FIRE PERFORMANCE REACTION TO FIRE PEEL RESISTANCE SHEAR RESISTANCE TENSILE PROPERTIES MAXIMUM LOAD AT BREAK Longitudinal Transversal ELONGATION AT BREAK Longitudinal Transversal RESISTANCE TO IMPACT RESISTANCE TO STATIC LOADING RESISTANCE TO TEARING Longitudinal Transversal...

WATERPROOFING MEMBRANES Treat the area to be waterproofed with bituminous primer (POLYPRIMER HP 45 Professional). Position the “Bordangolo” near the horizontal-vertical joint. Completely strip away the product identication tape. In the colder months, we recommend heating up the roll of membrane before applying it. Position and apply the sheet by flaming its bottom surface. Pull the sheet up to a certain height against vertical surfaces. Applicare il secondo telo con cimosa adeguata. Lay the second layer by overlapping. Do not cross the sheets. Roll the overlapping areas using the special pressing...