Flexo Light
6Pages

WATERPROOFING MEMBRANE WITH REVOLUTIONARY TECHNOLOGY REOXTHENE TECHNOLOGY INNOVATIVE BITUMINOUS POLYMER COMPOUND COLD FLEXIBILITY INCREASED PRODUCT PERFORMANCE FLEXO-LIGHT and FLEXO-LIGHT MINERAL are elastomeric waterproofing membranes with outstanding performance. They are made using a latest generation distilled bitumen-based compound, ultra-light REOXTHENE technology, with Evalith™ XTR polyester spunbond from Johns Manville, stabilized and reinforced with longitudinal glass fiber threads. EXCEPTIONALY EASY TO APPLY; HIGHER DAILY OUTPUT

REOXTHENE is the revolutionary technology developed by the POLYGLASS and MAPEI Research & Development laboratories. An innovative approach has revolutionised traditional bituminous compound mixing and compound techniques. This lets us go beyond yesterday’s technological limits in the weight/thickness ratio. REOXTHENE TECHNOLOGY lets POLYGLASS produce chemically innovative compounds with specific weights, which can’t be achieved using traditional phase inversion methods. REOXTHENE TECHNOLOGY is protected by a patent which guarantees exclusive POLYGLASS rights.

F.L.: Finishing Layer - U.L.: Underlying Layer - R.D.: Rising Damp - G.: Ground-water - E.: Exposed - U.H.P.: Under Heavy Protection The excellent features of flexibility, resulting from the presence of polymer SBS, make FLEXO-LIGHT and FLEXO-LIGHT MINERAL particularly appropriate for the waterproofing of structures (metal or prefabricated structures, walkable or non walkable terraces, domes or shed roofs) subject to cyclical movements or with considerable variations in size. The high mechanical chemical and physical properties ensure perfect adhesion to the substrate and between layers....

TEST METHOD TECHNICAL CHARACTERISTICS NOMINAL VALUES FLEXO-LIGHT MINERAL LENGTH m ≥10 WIDTH m ≥1 STRAIGHTNESS mm/10 m Exceeds THICKNESS mm 4 (-0,2) NPD WEIGHT PER UNIT AREA kg/m2 WATERPROOFING kPa Exceeds WATERTIGHTNESS AFTER STRETCHING % NPD EXTERNAL FIRE PERFORMANCE FRoof REACTION TO FIRE Euroclass E PEEL RESISTANCE N/50 mm NPD SHEAR RESISTANCE N/50 mm NPD TENSILE PROPERTIES MAXIMUM LOAD AT BREAK Longitudinal N/50 mm 650 (-20%) EN 12311-1 Transversal N/50 mm 450 (-20%) ELONGATION AT BREAK Longitudinal % 50 (-15) Transversal % 50 (-15) EN 12691-A RESISTANCE TO IMPACT mm ≥900 EN 12730-A...

LAYING FLEXO-LIGHT 1 - Treat the area to be waterproofed with bituminous primer (POLYPRIMER HP 45 Professional). 2 - Position the corner border near the horizontal-vertical joint. 3 - Completely strip away the product identification tape. 4 - In the colder months, we recommend heating up the roll of membrane before applying it. 5 - Position and apply the sheet by flaming its bottom surface. 6 - Pull the sheet up to a certain height against vertical surfaces. 7 - Apply the second sheet with adequate overlapping. 8 - Lay the second layer by overlapping. Do not cross the sheets. 10 - Example...

WATERPROOFING MEMBRANE WITH REVOLUTIONARY TECHNOLOGY REOXTHENE TECHNOLOGY ® . REOXTHENE TECHNOLOGY membranes use carrier from 05/14 Registered Office: Viale Jenner, 4 - 20159 MILANO Head Office: Via dell’Artigianato, 34 - 31047 Ponte di Piave (TV) - Italy Tel. +39 04227547 - Fax +39 0422854118 - www.polyglass.com - info@polyglass.it