ELASTOSHIELD TS 4 / ELASTOSHIELD TS 4 mineral
4Pages

ELASTOSHIELD TS 4 and ELASTOSHIELD TS 4 MINERAL are elastomeric waterproofing membranes with outstanding performance indicated for surfaces subject to cyclical movement. Guaranteed Quality with European Standards Green Building Council Bituminous membrane polymeric matrix ageing control r.'^.Vj Lateral and endlap LJ-tJJwL^ sealing strips Easily flamed non-stick polyethylene film MBDP Bitumen Distillate Polymer Membranes ROOFING AND WATERPROOFING SYSTEMS

TECHNICAL DESCRIPTION ELASTOSHIELD TS 4 and ELASTOSHIELD TS 4 MINERAL are elastomeric waterproofing membranes with outstanding performance, made of a latest generation distilled bitumen-based compound and thermoplastic elastomeric resin (SBS) with elevated elasticity reinforced with a continuous non-woven polyester fabric and longitudinal glass fibre. In addition to being rotproof, this reinforcement gives the membrane excellent mechanical characteristics (in terms of elongation and tensile strength, resistance to puncture, and dimensional stability). The special elastomeric compound grants...

NOMINAL VALUES ≥10 ≥1 Exceeds 4 (-0,2)* NPD Exceeds NOMINAL VALUES ≥10 ≥1 Exceeds 4 (-0,2) NPD Exceeds TECHNICAL UNIT OF CHARACTERISTICS MEASURE LENGTH m WIDTH m STRAIGHTNESS mm/10 m THICKNESS mm MASS PER UNIT AREA kg/m2 WATERTIGHTNESS kPa WATERTIGHTNESS AFTER EN 13897 % STRETCHING EN 13501-5 EXTERNAL FIRE PERFORMANCE EN 13501-1 REACTION TO FIRE Euroclass EN 12316 PEEL RESISTANCE N/50 mm EN 12317 SHEAR RESISTANCE N/50 mm TENSILE PROPERTIES MAXIMUM LOAD AT BREAK Longitudinal N/50 mm EN 12311-1 Transversal N/50 mm ELONGATION AT BREAK Longitudinal % Transversal % EN 12691-A RESISTANCE TO...

WATERPROOFING MEMBRANES Treat the area to be waterproofed with bituminous primer (POLYPRIMER HP 45 Professional). Position the “Bordangolo” near the horizontal-vertical joint. Completely strip away the product identication tape. In the colder months, we recommend heating up the roll of membrane before applying it. Position and apply the sheet by flaming its bottom surface. Pull the sheet up to a certain height against vertical surfaces. Applicare il secondo telo con cimosa adeguata. Lay the second layer by overlapping. Do not cross the sheets. Roll the overlapping areas using the special...