Group: MAPEI
Catalog excerpts
ELASTOBOND S6 ELASTOBOND S6 mineral ELASTOBOND S6 and ELASTOBOND S6 MINERAL are elastomeric waterproofing membranes with outstanding performance indicated for surfaces subject to cyclical movement. Guaranteed Quality UNI EN ISO 9001:2008 and UNI EN ISO 14001:2004 Product in compliance with European Standards All year membranes Lateral and endlap sealing strips Polyglass is a member of Green Building Council Easily flamed non-stick polyethylene film Bituminous membrane polymeric matrix ageing control WATERPROOFING MEMBRANES COLD FLEXIBILITY Manufacturers of Bitumen Distillate Polymer Membranes PROFESSIONAL LINE
Open the catalog to page 1TECHNICAL DESCRIPTION ELASTOBOND S6 and ELASTOBOND S6 MINERAL are elastomeric waterproofing membranes with outstanding performance, made of a latest generation distilled bitumen-based compound and thermoplastic elastomeric resin (SBS) with elevated elasticity reinforced with a high quality polyester carrier stabilized with longitudinal glass fiber threads. In addition to being rotproof, this reinforcement gives the membrane excellent mechanical characteristics (in terms of elongation and tensile strength, resistance to puncture, and dimensional stability). The special elastomeric compound...
Open the catalog to page 2COLD FLEXIBILITY AFTER ARTIFICIAL AGEING TECHNICAL CHARACTERISTICS LENGTH WIDTH STRAIGHTNESS THICKNESS MASS PER UNIT AREA WATERTIGHTNESS DURABILITY OF WATERTIGHTNESS AGAINST ARTIFICIAL AGEING DURABILITY OF WATERTIGHTNESS AGAINST CHEMICALS WATERTIGHTNESS AFTER STRETCHING EXTERNAL FIRE PERFORMANCE REACTION TO FIRE PEEL RESISTANCE SHEAR RESISTANCE TENSILE PROPERTIES MAXIMUM LOAD AT BREAK Longitudinal Transversal ELONGATION AT BREAK Longitudinal Transversal RESISTANCE TO IMPACT RESISTANCE TO STATIC LOADING RESISTANCE TO TEARING Longitudinal Transversal DIMENSIONAL STABILITY FORM STABILITY UNDER...
Open the catalog to page 3WATERPROOFING MEMBRANES Treat the area to be waterproofed with bituminous primer (POLYPRIMER HP 45 Professional). Position the “Bordangolo” near the horizontal-vertical joint. Completely strip away the product identification tape. In the colder months, we recommend heating up the roll of membrane before applying it. Position and apply the sheet by flaming its bottom surface. Pull the sheet up to a certain height against vertical surfaces. Apply the second sheet with adequate overlapping. Lay the second layer by overlapping. Do not cross the sheets. Roll the overlapping areas using the...
Open the catalog to page 4All Polyglass Spa catalogs and technical brochures
-
Polyvap Radonshield P-AL
3 Pages
-
Polysol IR 150
4 Pages
-
Polysol IPX-F
4 Pages
-
Polysol IPO
4 Pages
-
Polysol IP 35 V
4 Pages
-
POLYSOL IP 35 PLUS
4 Pages
-
Special products
20 Pages
-
SONIC
24 Pages
-
MODIBOND / MODIBOND mineral
4 Pages
-
Polyprimer
2 Pages
-
Acriplast
2 Pages
-
Estopaint plus
2 Pages
-
Flexo Light
6 Pages
-
Elastolight
6 Pages