INTRODUCTION Electrostatic discharge is a problem that you can’t ignore. The scuff of a shoe, the scrape of a chair creates an electron imbalance and, although the resulting discharge may be so small that the human body can’t feel it, it can nevertheless have serious consequences. In electronics manufacturing, in pharmaceuticals, healthcare, ordnance manufacture and storage, ESD incidents can often cause material, component or system failures, which may prove costly and perhaps even dangerous. THE POLYFLOR ESD RANGE The Polyflor ESD range has been specifically engineered to combat this problem...

sd/ec EARTH EARTH STRIP SD and EC — showing the method of installation using grounding strip, where conductance to ground is specified. Polyflor Conductive ROF — shows the method of installation to a grounding grid: an essential requirement for this product. BRASS/COPPER NUT AND BOLT WITH TWO WASHERS GROUND WIRE WITH CRIMP ON EYE WASHER NUT ELECTICAL BOX BOLTED TO WALL BRASS GROUNDING FOIL FOLDED BACK ON ITSELF. THEN HOLE PUNCHED THROUGH, TO TAKE BOLT A typical connection of the grounding grid to the building ground point. Refer to the BRE Green Guide for more details (www.thegreenguide.org.uk)....

All Polyflor ESD sheet vinyl ranges provide a continuous, impervious and hygienic flooring solution which can be confidently cleaned in accordance with recommended maintenance procedures and approved maintenance products. The implementation of an effective cleaning regime is the most important defence against infection. Polyflor is an ISO 9001 and ISO 14001 certified company. Our ESD products have low VOC emissions and will not contribute to negative indoor air quality. They contain up to 72% natural materials, they feature 25% recycled content and are 100% recyclable. BRE Generic A+ and A ratings...

These floorcoverings are ideal for use in telecommunications installations, computer rooms, electronic manufacturing and healthcare facilities, such as scanner rooms, X-ray suites and operating theatres. The SD range comprises: Finesse SD, in 5 non-directional colourways and Polyflor SD, in 6 shades with a marbleised design. Polyflor Electrostatic Conductive products have been engineered to meet the latest international standards for ESD protection floorcoverings. the combination is recommended in BS EN/IEC 61340-51 as being between 7.5 x 105 and 3.5 x 107 ohms. Polyflor EC and OHMega EC (Electrostatic...

PERFORMANCE & TECHNICAL SPECIFICATIONS TEST TYPE ELECTRODE DETAILS RESISTANCE REQUIREMENTS Installed Ground 30kg min load (66lb) on tripod with conductive feet, lower electrode to ground Upper electrode 30kgmin load (66lb) on tripod with conductive feet, lower electrode graphite coated. Static Dissipative All Polyflor SD products 1 x 106 — 1 x 109 Polyflor EC 1 x 104 — 1 x 106 All Polyflor SD products 1 x 106 — 1 x 109 All Polyflor EC products 1 x 104 — 1 x 106 Antistatic regime All Polyflor SD products & Polyflor EC conform Conductive regime Antistatic regime Conductive regime 63.5mm dia (2.5in)....

Roll Size Tile Size Use Area Classification Agrément ASTM E648 EN 649 Abrasion Group CONDUCTIVE ROFL EN 1815 ASTM F970 (modified) Conductive EN/IEC ROF for explosive handling areas, no protection from short circuit on a 240/250 volt mains. 61340-5-1 Polyflor EC and OHMega EC conform to foot/floor combination between 7.5 x 105 and 3.5 x 107 tested to EN/IEC 61340-4-5

Polyflor Australia E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] Ireland South Africa Polyflor Ireland Poly Sales Africa (Pty.) Ltd E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] New Zealand Polyflor Hong Kong E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] James Halstead France SAS Polyflor Nordic E-mail: [email protected] E-mail: [email protected] objectflor Art und Design Belags GmbH E-mail: [email protected] E-mail: [email protected] POLYFLOR HEAD OFFICE TM POLYFLOR...