Vitroflex Lighting
7Pages

ACRYLIC SHEETS

Product specially designed for LED lighting Backlight system permits the replacement of traditional light by bulbs or fluorescent. It also provides a reduction of the system application. Edgelight system redirect the light out of conductive material reducing the amount of LED sources needed. LEDs are displayed on the perimeter of materials which allows slimmer applications Allows uniform illumination without generating shadows. Supports all types of printed coating design to be backlit, like textiles, adhesives, canvas, vinyl, laminates, digital printing, screen printing, embossed finishes,...

Indoor and outdoor labelling, illumination Light sconces, floor lamps or tables, diffusers Illuminated facades system Interior partitions Day&Night system for letters Indoor and outdoor decorations Lighting by tubes and other shapes Signage and road sign Promotional signage

ACRYLIC SHEETS ■ Should be cleaned by applying a solution of mild soap (Neutral PH) with warm water using a non-abrasive cloth. Using aggressive detergents with non-neutral ■ Use of cleaners with alcohol damage sheet properties. ■ In case of wanting a strong disinfection should consult the table of chemical resistance of vitroflex, do a test on a piece, and use only recommended ■ Scratches can be appear due to normal use, you can removed using a specific polish for car bodies applied by hand. Product Name PMMA cast PMMA cast PMMA cast - Extrusion PMMA cast - Extrusion PMMA cast - Extrusion...

To 8 mm are made to the European standard 3050 x 2050 mm. To 8mm are made to the European standard 3050 x 2050 mm. From 40 mm are made in 3000 x 2000 mm. Any thickness can be supplied cut to size, with an accuracy of ± 1mm. Temperature variations can modify this value. Thickness − Standard thickness : o 4mm small formats <400mm from light source o 6mm for medium formats o 8mm best option for lighting applications o And the highest range called “blocks” 30, 40 , 50 mm. − Other thickness can be produced by request. − Apply tolerances accordingto ISO 7823/1. Compliance with ISO 7823/1...

Vitroflex LED Technical characteristics ISO 7823-1 1 Physical properties Relative Density - Density and specific gravity (Method A) Water absorption (Method 1) Plate thickness tolerance of 5 mm Plate thickness tolerance of 18 mm Elongation at rupture (type 1, B-speed test) Resistance to shock. Charpy method Hardness Rockwell (M scale) Flexural strength VICAT softening temperature Mechanical properties Tensile strength (type 1, B-speed test) Modulus of elasticity in tension (type 1, B-speed test) Thermal properties Coefficient of linear expansion Bending under load (method A, 1.8 MPa)...

Optical properties - EDGELIGHT - system MCEDGE5N Thickness (mm) Transmission of light (%) ISO 2857 Surface finish type Material CLAS. Fire With reticle Without grid Important: The information and statements included here are believed to be reliable, but should not be construed as a warranty or representation that Vitroflex Advanced Plastics assumes legal responsibility. Users must perform verification and insufficient evidence to determine the suitability of any information or products listed on this document to your case or particular purpose. Vitroflex Advanced Plastics cannot guarantee...