PARTITION WALL PLASTBAU STRUCTURAL ELEMENTS FOR INTERNAL PARTITIONS, CURTAIN WALLS AND ROOFS PRODUCTS CATALOG

MALE/FEMALE HIGH Inside the panels, there are 2 built-in galvanized metal profiles, 30 cm axle spacing, 8/10 mm thickness, POLYSTYRENE) ELEMENTS C-shaped. In the panels 6, 8, 10 and 12 cm, the height of HAVE 2 BUILT-IN METAL PROFILES - WIDTH 60 CM the two internal profile floating in EPS corresponds to the panel thickness they are fitted to. On request, the entire range is available with the metal profiles covered with 1 ELEMENTS THICKNES cm EPS. Their thicknesses are the following: 6+(1+1)=8 cm; as an alternative they are available with 1 visible profile only on a single side, in the different...

PERFORMANCES CALCULATION TABLE In compliance with enclosure ZA of the regulation EN13163 where the features are specified relating to the CE labelling. The professional liable for the building thermal features should check the stratigraphy and select the insulation panel thicknesses which better comply with the thermal conductivity within the limits forecast by the regulation or by the project. y Partitions wall for residential and industrial buildings y Roof tiles underlay with wood beams APPLICATION y Perimeter fillers as curtain wall in to beams ana y False ceilings RANGE columns structures...

3 Panel cutting at the metal profile level 4 Partition screwing to the profile 5 False-frame fitting for the door 6 False-frame screwing to the partition upright The above suggested and laboratory data in the applications of crostruction site may undergo ways that depending on the conditions of installation. The user must verify the sutability of the product, taking all responsibility for its use. Poliespanso Srl reserves the right to make alterations to any kind without prior notice.

ROOFS UNDERLAY WITH BRICK-WALL BEAMS The system evolution included the replacement of the traditional blocks with the innovating Partition Wall Plastbau® panels, concentrating in a single element unique features, simplifying their laying, cutting timing, reducing costs and providing for a better insulation. The roof tiles underlay execution process is similar to the traditional process therefore bricks walls / wooden beams spacing should be selected according to the PWP panel model. Hereinafter annexed a table suggesting the brick walls / wooden beams spacing. Note: it is possible to ask for...

Partition Wall Plastbau® panels duly taking their thermal insulation and mechanical resistance features can be used as perimeter fillers as curtain wall for buildings with different structures such as iron, wood or reinforced concrete. The model with a C-shaped metal profile 12 cm, visible on the interior and covered on the exterior, in different thicknesses according to the project stratigraphy up to maximum 20 cm, can be finished at the extrados with dry finishes screwed to the panel uprights or to specific frames. At the intrados can be finished with gips boards or any dry finishing. MODELS...

The many available features, lightness included, offer any designer and professional layer many application possibilities which allow to ease and speed up any laying activity and yard organisation. Building with steel frames structures Building with reinforced concrete structure The customised Partition Wall Plastbau® panels are fitted through the tapping and screwed on metal profiles and on the floor and on the ceiling. The vertical upright frames providing for the window and floor frame fitting. Partition Wall Plastbau® as filler / curtain wall Frames for windows and doors Internally, the filler...

"We aim at producing building materials for more ecologically sustainable buildings, leading to a more consistent energy saving, as to provide for a better comfort to the building dwellers, with a higher laying safety and speed for the building constructors; higher certainty of the final result for the designer, engineer, construction company and final user." POLIESPANSO s.r.l. (z.i. Valdaro) Via A. Vespucci, 10, 46100 Mantova Italy Tel. +39 0376 343011 . Fax +39 0376 343020 www.poliespanso.com - [email protected] POLIESPANSO ICF CONTRUCTION SYSTEM