Safety shower test unit Data sheet The photo above is for reference only, may show additional options not included in standard equipment. The real appearance, particularly color and structure of the material may differ from the ones presented in the photo. Laboratory safety showers should be tested once a month to check the functionality and the requested water flow rate of 60 l/min in an emergency case. This mobile test unit provides a very convenient and easy solution to test your body safety showers and handheld eye showers. • • • • Transparent PVC water reservoir on castors, 110 litre capacity Built-in suction pump (230 V) and IP 45 protected power switch Drain hose (2 m) to empty the water reservoir Separate mounts for drain hose and power cord Centrally placed under the body safety shower the big funnel can be extended to a height of 2,30 metres, while the smaller funnel is designed to collect the water from handheld eye showers (min. flow rate: 6 L/min). The collected water amount can be read on the water reservoir scale from 0 to 110 litres. The built-in electrical suction pump will empty the reservoir in a very short time. According to EN 15154-1,2:2006 the water flow rate of the plumbed-in body showers shall be at least 60 l/min and 6 l/min of the plumbed-in eye wash units.

TECHNICAL DATA reservoir capacity [l] water reservoir material pump power supply [V] power switch protection drain hose lenght [m] diameter of small funnel [mm] max height of large funnel [mm]