Resilient Sound Isolation Bracket PATENTS: US 7,895,803 Product Specification Product Name: Unibody molded rubber and steel bracket used when superior sound control is required in multifamily housing, high-rises, or commercial buildings. Resilient sound isolation bracket used in a variety of applications where structural support is required, including wall sway bracing, ceiling suspension, and accessory mounting. • Significantly improves low and high frequency sound control performance • Substantially reduces impact noise in floor-ceiling assemblies • Adaptable to a variety of sound control applications • Can be installed from the ground using extended gas-powered tools for wire-suspended ceilings • Qualifies for LEED® points nom. 51 mm length, 44 mm width, 111 mm height (2” length, 1 3/4” width, 4 3/8” height) Bracket Weight: Lead Time: 2 weeks after receipt of order Technical Data Minimum Pullout and Shear: Type A Hardness (ASTM D2240): Laboratory Sound Transmission Class (ASTM E90): Specified wall or floor-ceiling assembly must be tested in a NVLAP-certified laboratory and comply with ASTM standards. For Your Project Specific Questions UK +44 203 9846444 | Asia Pacific +65 8452 6865 | E. [email protected] © Pliteq (UK) LTD. 2019. ® ™ Trademarks of Pliteq Inc. The information provided is accurate to the best of our knowledge at the time of issue. However, we reserve the right to make changes when necessary without further notification. Suggested application may need to be modified to conform with local building codes and conditions. We cannot accept responsibility for products that are not used, or installed, to our specifications. All listed dimensions a

Resilient Sound Isolation Bracket PATENTS: US 7,895,803 Technical Data Continued Field Sound Transmission Class (ASTM E336): Specified wall or floor-ceiling assembly must meet requirement as stated by building code and/or acoustical consultant. Temperature Stability: For Your Project Specific Questions UK +44 203 9846444 | Asia Pacific +65 8452 6865 | E. [email protected] © Pliteq (UK) LTD. 2019. ® ™ Trademarks of Pliteq Inc. The information provided is accurate to the best of our knowledge at the time of issue. However, we reserve the right to make changes when necessary without further notification....