GENERAL CATALOGUE
GENERAL CATALOGUE
PLASMACEM, established in 2006 in Vicenza, Italy, focuses on producing environmentally friendly formwork systems for concrete construction. Their patented form liners are versatile, with reuse capabilities ranging from 3 to 100 times based on material type.
- Form Liners for Large Panels: Made from polyurethane, reusable up to 100 times, with no size limit, and can be used without fixing. Magnetic anchoring is possible.
- Form Liners for Pre-casting: Made from flexible sintered polyurethane, allowing 10-50 reuses, requiring glue for fixing, with magnetic anchoring possible.
- Form Liners for On-site Casting: Made from high-density EPS, reusable up to 5 times if covered with film, and can be fixed to various formwork materials.
- Self-bearing Form Liners: Made from high-density polyurethane with resin, allowing over 300 reuses, available in multiple finishes.
Form liners can be secured using glue, screws, or magnets for in situ casting. For pre-casting, glue and magnets are used, and liners can be used without securing them to benches.
For optimal results, use class S4 concrete with a suitable superplasticizer. Store liners in a dry place away from direct exposure to elements, and release concrete within 24 hours of casting.
Form liners are used in building and civil engineering, precast concrete, and cast-in-place concrete, allowing for pattern creation on exposed concrete walls and adapting buildings to aesthetic needs.
PLASMACEM offers custom-sized form liners with a tolerance of ±1% on dimensions. Preliminary tests are recommended to ensure application conditions are met, and specifications may change without notice.
The document categorizes form liners based on joining capabilities and series types, including:
- Joining Capabilities: Form liners can join on four sides, top/bottom, right/left, or cannot be joined at all.
- Series Types: The 'Stonclear' series is noted, with specifications if covered with film.
Each form liner type has specific codes and dimensions, with options for custom sizes. Measurements are provided in millimeters (L x H), and casting quantities range from small to large batches.
Examples include:
- Point M: Available in various dimensions and casting options.
- Prun: Offered in standard and custom sizes.
- Qubik: Includes multiple series with different joining capabilities.
- Qubikstone: Similar to Qubik but with distinct specifications.
The document highlights the adaptability of form liners for both metal and plastic formworks, indicating versatility in application. High-density rigid polyurethane is used for panels, ensuring quality and durability.
Alternative applications include urban furniture, interior design for high-profile clients, and bespoke design solutions.
Unique self-bearing form liners are available in Stonclear and Flex versions, and the innovative mano© panel combines resin-coated polyurethane with wood for aesthetically pleasing concrete finishes.
Plasmapan© panels offer a service life of up to 300 castings, maintaining traditional panel dimensions and using conventional hardware. They feature a rubber surface that acts as a gasket, preventing grout leakage.
Plasmapan© panels can be regenerated by replacing the rubber after 300 casts. Old conventional yellow panels can be transformed into Plasmapan© panels.
Panels have additional rubber reinforcement on edges for perfect alignment and to smooth out height discontinuities.
Plasmapan© panels provide a smooth casting surface without imprints, and rubber plugs can be used to maintain a smooth surface without marks.
PLASMACEM, a brand of ReKreo Srl, is located at Contrà San Francesco, 34, 36100 Vicenza, Italy. Contact via phone at +39 0444 546968 or email at [email protected].
Catalog excerpts
Plasmacem Form liners ESSEFLEX mano© concrete make up
Open the catalog to page 4
Il calcestruzzo bello per natura PLASMACEM nasce a Vicenza nel 2006 a seguito di esperienze maturate nell’ambito scenografico all’interno di importanti parchi divertimento, con lo scopo di realizzare casserature da getto a basso impatto ambientale. L’obiettivo è stato raggiunto con la produzione di matrici create su nostro brevetto esclusivo, sia per l’utilizzo in cantiere, sia per la realizzazione di elementi prefabbricati. La diversa tipologia di materiale utilizzato per la realizzazione delle matrici, permette un numero di reimpieghi che va da 3 a 100; inoltre, il settore ricerca/sviluppo...
Open the catalog to page 5
PLASMACEM a été fondé en 2006 à Vicenza (Italy) à la suite d’une nouvelle expérience: organisation de décor à l’intérieur de vastes parcs d’attraction en fabriquant des bacs en coulée peu voyants dans le paysage. C’est ce que nous avons réalisé avec des moules au brevet exclusif, produits sur le chantier aussi bien que préfabriqués. Компания PLASMACEM основана в 2006 году на севере Италии, в городе Виченца, став результатом накопленного опыта в области установки декораций в крупных парках культуры и отдыха, для производства опалубок для бетона с низким отрицательным воздействием на окружающую...
Open the catalog to page 6
• Matrici in materiale poliuretanico. • Form liners in polyurethane material. • Nessun limite dimensionale. • Possibile utilizzo senza fissaggio. • Can be used without fixing. • Possibilità di aggancio magnetico su banchi da prefabbricazione. • Magnetic anchoring possible on precast benches. • Matrici adatte anche per colonne (vedi pag. 126). • Form liners also suitable for columns (see page 126). • Matrice en Polyuréthane matériau. • Матрицы из полиуретанового материала. La matrice per teli di grandi dimensioni La matrice pour panneaux de grandes dimensions • 100 réutilisations. • Pas de limite...
Open the catalog to page 8
• Matrici in poliuretano sinterizzato MORBIDO. • Form liners in sintered polyurethane (FLEXIBLE). • Utilizzo con fissaggio a colla. • Use with glue only. • Possibilità di aggancio magnetico su banchi da prefabbricazione. • Magnetic anchoring possible on pre-cast benches. • Matrici adatte anche per colonne (vedi pag. 126). • Form liners also suitable for columns (see page 126). • Matrice en polyuréthane sintérisé SOUPLE. • матрицы из спеченного полиуретана FLEXIBLE. La matrice pour la préfabrication • Coller avant utilisation. • Possibilité d’ancrage magnétique sur les banches de préfabrication....
Open the catalog to page 9
• Matrici in EPS ad alta densita. • High density EPS form liners. • Fissaggio su casseri con colla o viti. • Can be fixed to plastic, wooden or metal formwork. Il cassero per il getto in opera monouso • Fissaggio su casseri in plastica, legno o acciaio. • Assemblaggio ad appoggio migliorato. Form liners for on site concrete casting • Improved assembly. *If covered with film. • Matrices en EPS/polystyrène à haute densité. • Матрицы из вспененного полистирола высокой плотности. La matrice jetable pour le coulage en oeuvre • Fixé aux coffrages par colle ou clous. • Fixé aux coffrages en plastique,bois...
Open the catalog to page 10
mano© concrete make up • Pannello da getto sagomato con poliuretano ad alta densità con addizione resinosa. • Shaped panel for casting with highdensity polyurethane fortified by resins. • Pannello da getto sagomato con poliuretano sinterizzato MORBIDO per finiture ad alto profilo ed in presenza di sottosquadra. • Shaped panel with SOFT sintered polyurethane for high section finishes and with undercuts. • Available in four standard finishes, as well as in several customized finishes. • Disponibile in quattro finiture standard, con possibilità illimitate su richiesta del cliente. • Adatto anche...
Open the catalog to page 11
TAILOR MADE CONCRETE Matrici per il calcestruzzo architettonico by PLASMACEM L'impiego delle matrici per il calcestruzzo architettonico consente: • di strutturare i faccia a vista in calcestruzzo; • di adattare gli edifici ad ogni esigenza estetica; • di ottenere superfici regolari in modo piu semplice ed economico, grazie ai giochi d'ombra e di luce che si possono generare. • edilizia e genio civile; • calcestruzzo prefabbricato; • calcestruzzo gettato in opera. considerazione sono: • numero preciso di matrici da assemblare; • disegno da rispettare (montaggio in continuo o posizionamento di...
Open the catalog to page 12
TAILOR MADE CONCRETE Form liners for architectural concrete by PLASMACEM Using form liners for architectural concrete allows you to: • create patterns on exposed concrete walls; • adapt buildings to meet all aesthetic needs; • obtain even surfaces in a simple and cost-effective manner, thanks to the play of light and shadow that can be generated. • building and civil engineering; • precast concrete; • cast in place concrete. • the precise number of form liners to assemble. • the design to comply with (continuous mounting or positioning of joints); • dimensions adapted to the formwork to be used;...
Open the catalog to page 13
Matrices pour le béton architectonique by PLASMACEM L’utilisation des matrices pour le béton architectonique permet: • de structurer les faces visibles en béton; • d’adapter les bâtiments à toute exigence esthétique; • d’obtenir des surfaces régulières plus simplement et à moindre coût, grâce aux jeux d’ombre et de lumière, qu’il est possible de générer. Domaines d’utilisation: • bâtiment et génie civil; • béton préfabriqué; • béton injecté sur site. Les paramètres fondamentaux à prendre en compte sont les suivants: • nombre précis de matrices à assembler; • dessin à respecter (montage en continu...
Open the catalog to page 14Archived catalogs
2022 Plasmacem catalogue180 Pages
- Modular formwork element
- Stamped concrete form liner
- Wall formwork
- Facade form liner
- Concrete form liner
- Building construction panel
- Steel formwork system
- Wall form liner
- Wooden formwork
- Adjustable formwork
- Wood look form liner
- Stone look form liner
- Imitation brick form liner
- Retaining wall form liner
- Enclosure wall form liner
- 3D effect form liner
- Floor form liner