Overview
This document provides detailed information on finishing materials, specifically focusing on unique surfaces made from metals such as steel, copper, brass, bronze, and calamine. It outlines specifications, cleaning procedures, and standards for these materials, emphasizing their quality, natural composition, and recyclability.

Specifications
- Millimetric unevenness between plates up to 2/3 of the metal foil thickness is not considered a defect.
- Thickness varies from 1.5 to 2 mm, with some materials up to 7 mm.
- Floor laying systems include MG01 Magnetic, AP01 Lay, AC01 Stick-On, and wall coating system AC02 Stick-On.

Cleaning and Care
- Metals should be cleaned with neutral products like EUFAST and VENUS emulsions from KITER.
- Use a damp floor cloth for quick drying to avoid water marks.
- For large surfaces, cleaning machines with neutral industrial detergents are recommended.
- Calamine requires special care to prevent excess oxidation; avoid prolonged water exposure.
- Regular cleaning with EUFAST detergent is suggested to maintain and protect surfaces.
- Use felts under furniture to prevent scratches and place mats in entrance areas.

Standards and Testing
- Slip resistance and dynamic friction coefficients are provided for various metal finishes, adhering to standards like BCRA, ANSI, and DIN.
- Calamine and other metals have specific slip resistance ratings, ensuring safety and compliance with international guidelines.

Recommendations
- Avoid direct and continuous sun exposure to prevent dimensional changes and accelerated oxidation.
- Install and use calamine at temperatures between 15 and 35 degrees centigrade.
- Planium provides pre-treatment with specific detergents/polishes to reduce material porosity and enhance protection.

Conclusion
Planium S.r.l. emphasizes the combination of technological innovation and craftsmanship to create high-quality, sustainable, and aesthetically pleasing metal surfaces. Their products are designed to be functional, elegant, and uniquely Italian.