Catalogs >
Plafometal >
Type U

Type U
2Pages

Catalog excerpts

• Designed to be clipped onto a concealed grid. • The strip has straight sides and square edges. • The open gap between strips can be 5, 15 or 20 mm • Inter-strip profiles in the same or different colour can be used to create a 15 or 20 mm closed hollow joint. Product benefits • Cost-effective and easy to install. • Can be used to create long lengths. • Reinforced directional effect. • Available in a wide range of widths, heights and colours. • Can be installed beneath an exterior canopy under certain conditions.

Open the catalog to page 1

Type U > Linear strip with straight sides and square edges with 5, 15 or 20 mm gaps Installation according to DTU 58.1 (see page 146 for details) • Hangers with 1200 mm axis regularity starting 300 mm from the wall, and runners with 1200 mm axis regularity with a 300 mm strip overhang. • Perimeter channel trims recommended. • Strip connection splice plates possible. 5, 15 or 20 mm gap: see the dimensions provided in the table Height + 30 •Strip reference = width U height (e.g.: 85 U 13). • Length on request (min. 900 - advised max. 6000 mm). •Straight sides and square edges. •Aluminum 0.5...

Open the catalog to page 2

Type U 2Pages

Catalog excerpts

All Plafometal catalogs and technical brochures

Type U
2Pages