Catalogs >
Plafometal >
Type R

Type R
2Pages

Catalog excerpts

ESSENTIAL ELEMENTS - LINEAR STRIPS > Linear strip with round edges and 5 or 15 mm gaps • Designed to be clipped onto a concealed grid. • The strip has rounded edges. • The open gap between strips can be 5 or 15 mm. • Inter-strip profiles in the same or different colour can be used to conceal the 15 mm gaps or create a closed hollow joint. Product benefits • Cost-effective and easy to install. • Can be used to create long lengths. • A softer directional effect. • Available in a wide range of colours. • Can be installed beneath an exterior canopy under certain conditions.

Open the catalog to page 1

Cutout cover Model shown: 85R with flush joint cover strip on PPA 35-15 runners Type R > Linear strip with round edges and 5 or 15 mm gaps Installation according to DTU 58.1 (see page 146 for details) • Hangers with 1200 mm axis regularity starting 300 mm from the wall, and runners with 1200 mm axis regularity with a 300 mm strip overhang. • Perimeter channel trims recommended. • Strip connection splice plates possible. • Width: 85 mm. • Length on request (min. 900 – advised max. 6000 mm). • Height: 15 mm. • Round edges. •Aluminum 0.5 or 0.6 mm thick. Linear strip dimensions 5 mm gap: with...

Open the catalog to page 2

Type R 2Pages

Catalog excerpts

All Plafometal catalogs and technical brochures

Type R
2Pages