PIZ Cladding systems
52Pages

Cladding systems

PIZ is an innovative cladding system for civil and industrial buildings. The structure is installed by securing light alloy guides on the surface to be covered and then fixing the insulating Piz panels on these guides. The panel is made up of a modified fibre-reinforced cement mortar layer coupled with a slab of insulating material. The grooves on the upper and lower edges of the cement element serve the purpose of housing the assembly sections. PIZ was developed to satisfy the growing needs of the construction market in terms of energy savings and architectural improvement. The system is...

omega aluminium profile

Panel The panel is 54/66/89 mm thick and comprises a 9 mm external cement mortar bonded to a 45/57/80 mm expanded polystyrene insulating layer. Aluminium section The anodised aluminium support rails are available in black or silver (also available on demand in RAL colours). Anchoring systems The screw or expansion fixings are determined at design stage according to support surface. mm 15 mm 15 Panels are available in standard sizes (see table) with a +/- 20 mm variation

Advantages 8 | PIZ cladding systems Appearance Maximum freedom of design, configuration and expression, combinations of shapes, colours and joints, amazing improvements of existing buildings.

Edificio commerciale MILANO Via Mecenate Resistance to atmospheric agents (water, wind, heat, cold), good fire behaviour (class 1 certified materials), delayed flame propagation in case of fire, impact and abrasion resistance, transpirability, condensation and mildew prevention, increase in living comfort. Reasonable cost, energysaving performance, no maintenance expenses, direct installation on all surfaces without preliminary works (no need for plastering or replastering). Metal structure with anticorrosion coating, high quality cement surface, certified anchoring systems,...

Struttura hotel FANO - PU

Installation The PIZ system can be mounted on any surface (reinforced cement, brick, metal structure, etc.). In case of renovation work, no preliminary activity or cleaning of the support surface is required. Panels are fixed on the surface by means of an anchoring system and of special section bars. Installation requires simple mechanical operations; no skilled workers or special components other than those provided with the system are necessary. Panels are mounted in a horizontal direction. Vertically, the installation is performed from bottom to top. Standard arrangements can be...

Specific thermal conductance of the panel: standard 54 = 0,69 W/m2K plus 66 = 0,54 W/m2K H89 = 0,39 W/m2K Water vapour permeability: transpiring system with open joints. Water Vapour Permeability: μ=86 Water Absorption: under full water immersion after one hour less than 0,03 Kg/m2 Panel weight: 20 Kg/m2 (average weight) Resistance under wind suction test: variable from 3300 N/m2 (min) to 6270 N/m2 (max) depending on panel size and type of joint. Impact Resistance: in compliance with category I e III ETAG 17. The system passes the impact soft test (400 Joule) and hard impact test (10...

Centro de Inserción Social HUELVA - ES

PANEL SIZES The PIZ panel is available in the following sizes with 0 mm or 15 mm joint

Thanks to the wide range of colours and finishes, it is always possible to identify the best solution for a building to meet the customer’s specific needs. Eight basic colours (plus white) are available in 5 shades, generating a palette of 40 colours. Four finishes are provided: smooth, rough, granular and grooved.

Palaghiaccio TORINO 2006 Olimpiadi Invernali

Centro sportivo PANDINO (CR)

Guarantees and certifications PIZ has been awarded the following certifications: ICMQ “product certification” N°P028, CSTB AVIS TECHNIQUE N°2/05-1126 and ETA N°06/0135. An additional guarantee is the Reale Mutua insurance policy n°12854 covering the expenses for replacing defective products. Raw materials, endproducts and components are always tested in laboratory to ensure optimal performance and duration. The mechanical fixing system guarantees excellent resistance to thermal shocks. The fibre-reinforced cement layer, coloured in series with mineral oxides, ensures maximum chromatic...

Condominio San Giuseppe MORBEGNO (SO) Architetto Luigi Caccia Dominioni

Intelligent surface PIZ and photocatalysis In cooperation with the “Politecnico di Milano” Technical University, Piz srl has developed PIZ I.S., a cladding system obtained using titanium dioxide to alter the material’s surface characteristics, generating photocatalysis and superhydrophilicity. Self-cleaning properties Thanks to its special dirt-resistant characteristics, PIZ I.S. enables to contain cleaning and maintenance costs, exploiting the chemical reaction following light absorption by a catalyst, also known as superhydrophilicity. This phenomenon enables the water to spread evenly on...

iiin rrrrrrrrrrrr

Immeuble résidentiel GRENOBLE - FR

Edificio CZ2 MORBEGNO (SO) Progettisti: Egidio Speziale Giampiero Fascendini

Università Federico II NAPOLI Palazzina Uffici PAVIA

Centro direzionale TRENTO Edificio residenziale LISSONE (MI) Architetto Angelino Fossati

Holiday Inn Cardiff City Centre - UK Design: Arch. S. Dodd Satellite Design Workshop Ltd Project Manager: Peter Roberson Installator: S.P.V. Group

Hotel Express Holiday Inn CUNEO

Fondazione San Raffaele MILANO

Centro direzionale / residenziale BOLOGNA

Residence Les Bapaumes ERMONT - FR Design office: Cet Ingénierie

Residence Les Mallefranches AMFREVILLE LA MIVOIS - FR Architect Gilles Thorel

Residenza privata COSIO VALTELLINO (SO) Architetto Matteo Romegialli

Setificio Ratti GUANZATE (CO) Architetto Luigi Caccia Dominioni

Biondani Ceramiche VERONA Architetto L. Caccia Dominioni Architetto A. Cesaraccio Architetto Grigolon Ingegnere F. Veneri

PIZ srl via dei Molini 22 23010 Cosio Valtellino (SO) ITALY T +39 0342 60.60.60 F +39 0342 60.60.80 Milano - Piazza Mentana, 3 T +39 02 87.39.38.87 F +39 02 87.39.38.86 www.piz.it piz@zecca.com