
Customer Technical Update Pilkington Activ™ The world’s first self-cleaning glas
Open the catalog to page 1Products Compatible with Pilkington Activ™ June 2021 Testing has demonstrated that the use of incorrect materials and in particular silicone containing products with Pilkington Activ™ can affect its performance. This list has been created to help identify compatible materials This update contains information which is designed to provide you with up to date information about the technical aspects of Pilkington Activ™, in particular glazing materials that are compatible with the product. New information added since the last edition is shown in RED so you can easily find it. If you have any further...
Open the catalog to page 21 Dry Glazing System Materials - Residential and Commercial Applications 1.6 Glazing Tape/Material Systems 2 Wet Glazing System Materials - Residential and Commercial Applications 2.2 Wet Glazing Sealants - MS/Hybrid Technology 3 Commercial Glazing Systems 4.4 List of Approved Cleaning Agents 5 Available Products with Pilkington Activ™ 5.1 Pilkington Activ™ - product range
Open the catalog to page 31. Dry Glazing System Materials - Residential and Commercial Applications - co-extruded profile - coated / lubricated gasket - standard gasket - all frame types - PVC-U dry glazing - EPDM - TPE - silicone based rubber - foam e.g. polypropylene - vinyl - glazing tape When glazing Pilkington Activ™, the strongly preferred option is to use a co-extruded gasket or a dry rubber gasket. Only if the use of a dry gasket or co-extruded system is not possible should a rubber gasket lubricated with glycerol or alternative silicone free / siloxane free lubricant be used. If all of the above options are unavailable...
Open the catalog to page 4■ Note: Lubricated/Coated samples sent for testing showed little or no hydrophobic leaching and therefore passed tests. Due to the nature of these lubricants they must be applied by the manufacturer and be fully dried prior to sue. Under no circumstances should additional lubricant be applied on site.
Open the catalog to page 61.6 Glazing Tape/Material Systems
Open the catalog to page 142. Wet Glazing System Materials - Residential and Commercial Applications Residential Windows Pilkington Activ™ Wet Sealant Applications Pilkington Activ™ Frame = Wet Glazing Sealant = Glass Adhesive Pilkington Activ Commercial Wall = Weather Seal For Pilkington Planar / Butt Glazing Please Note: If there is a straightforward pathway for water run-off between the caulking and the Pilkington Activ™ surface, the caulking material used should NOT be silicone. Alternatives include Silicone hybrids, MS Polymers and polyu
Open the catalog to page 16SCG-TEC based sealants have been specifically developed for use with Self Cleaning Glass. These products offer improved UV resistance and durability compared with MS Polymer based sealants and are certified to external standards (e.g. ISO 11600, further details are available from the individual sealant suppliers). As with all approved sealants these materials have been tested for compatibility with Pilkington Activ™. These sealants are suitable for both residential and commercial applications. As with all sealant applications, checks with the sealant supplier that the material is suitable for...
Open the catalog to page 172.2 Wet Glazing Sealants - MS/Hybrid Technology MS Polymer / Hybrid based sealants have been tested for compatibility with Pilkington Activ™. Suitability of these sealants for the intended application must be discussed with the individual manufacturer.
Open the catalog to page 19Note - Glass adhesives are not glazing sealants
Open the catalog to page 22Please Note: If there is a straightforward pathway for water run-off between the silicone caulking and the Pilkington Activ™ surface, the caulking material should NOT be silicone. Alternatives include MS Polymers and polyurethanes. The product listed below has been tested and is compatible with Pilkington Activ™ as a sealant to be used between window frame and brickwork, concrete or cladding material. To mount the glass into a window frame, other sealant types are available. Further details on application suitability is available from the supplier.
Open the catalog to page 233.0 Commercial Glazing Systems
Open the catalog to page 24All of the lubricated gaskets have been tested for compatibility with Pilkington Activ™ in the vertical orientation. Some of the gaskets that are lubricated with a silicone emulsion have occasionally shown very low levels of leaching (<2 cm). However, due to the longer residence time of water on the gasket, there is the potential for an increased level of leaching if these same gaskets used in sloped glazing. Under no circumstances should extra lubricant be used during installation. Please check with your supplier to ensure gaskets lubricated with silicone emulsion are NOT used in sloped installations....
Open the catalog to page 25In addition to the above specific systems, there are a number of suppliers who can supply nonsilicone based gaskets, if they are specifically requested. This service is available from the German offices but can be discussed with your local representative. Please put on the order "Non-silicone gaskets required for use with Pilkington Activ™." These suppliers are listed below, along with their contact phone number in Germany.
Open the catalog to page 26Protective film Use is optional. If a film is used, any residual adhesive should be cleaned off, first with hot soapy water, secondly with a solvent wash for more stubborn adhesive, but never with an abrasive substance or cloth. Cleaning agents Decorative leading Applied bevels Certain products have been tested and are compatible with Pilkington Activ™. See list of approved products Certain adhesives have been tested and are compatible with Pilkington Activ™. See list of approved products
Open the catalog to page 274.4 List of Approved Cleaning Agents
Open the catalog to page 31The use of silicone removers / abrasive cleaners on Pilkington Activ™ is considered as a remedial action which should only be undertaken after consultation with the NSG Group Technical Advisory Service. Due to the nature of these materials, work should only be undertaken after reading the manufacturers' relevant safety literature. NSG Group cannot guarantee the effectiveness of the treatment or the effect the treatment will have on the coating as this will be severely affected by factors outside NSG Group's control, for example the nature and amount of the deposit. The use of silicone eaters...
Open the catalog to page 324 Pages
8 Pages