Sound insulation Product sheet PHONOTECH DK80 Description The Phonotech® DK80 element is based on the floating roof principle through its spring batten providing a mass-spring-mass effect. Due to its RD80 start and end battens, the Phonotech DK80 system forms an intuitive complete roofing assembly. This decoupling will block any transfer of vibrations through its shock absorbing effect and will provide optimum sound reduction. INSTALLATION Due to their light weight, Phonotech elements can by installed by one person alone. The intuitive Phonotech attachment system guarantees easy and fast assembly. Application The Phonotech® DK80 acoustic system can be laid both on flat roofing and sloped roofing. Finishes Most of our acoustic systems are tested without a finishing coat (sealing, tiles, etc.) This gives the customer total freedom on the choice of roof finish to be applied. Accessories COMPOSITION OF PHONOTECH DK80 1. A spring batten: • 20 mm acoustic polyurethane foam • A treated wooden nailer 2. 80 mm specific density stone wool 3. 22 mm waterproof chipboard panel acoustic performances The Phonotech DK acoustic system guarantees highly efficient sound insulation relying on extensive laboratory testing subsequently confirmed by on-site measurements. The Phonotech panel’s acoustic performances, depending on implementation on different supports (TAB106, perforated sheets, wood, etc.), are given on the system sheets. All the accessories needed to assemble the Phonotech DK80 acoustic system (such as retaining profiles, separating tape, acrylic putty, fasteners, etc.) can be supplied on request. ADDRESS Zoning Industriel les Plenesses Rue des Waides 8, 4890 Thimister Belgium WEBSITE PHONE EMAIL FAX