1. Catalogs
  2. Pfister
  3. E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C

E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C

E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C

E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C

Product catalog summary
Introduction
This document provides installation instructions for the Price Pfister wall-mounted tub and shower mixer with showerhead, detailing steps for using an optional deck plate or a single post ring.
Specifications
The product is designed for easy installation with basic tools, factory tested for durability, and compatible with both flexible and rigid supply lines.
Tools Recommended
  • Pliers
  • Flashlight
  • 9/16” and 11/16” open-end wrenches
  • Adjustable wrenches (optional)
  • Plumber’s putty
  • Flaring tool (for copper tube installations)
Installation Procedures
1. Preparing for Installation
Shut off water supply valves, remove existing faucet if necessary, and clean the sink surface.
2. Installing Optional Deck Plate
Apply plumber’s putty to the deck plate, install over sink holes, and secure with wing nuts.
3. Installing Single Post Ring
Align and press the single post ring onto the faucet body.
4. Installing the Faucet
Insert supply tubes and mounting shank through the deck plate or sink hole, securing with a lockwasher and brass mounting nut.
5. Connecting Water Supply Lines
Connect hot and cold supply tubes to inlet fittings, using an 11/16” wrench to secure.
6. Flushing Valve
Turn on water supplies, check for leaks, flush the faucet, and reattach the sprayhead.
Recommendations and Cautions
Ensure secure connections to prevent leaks and use compression fittings properly to avoid blow-out conditions.
Warranty Information
Price Pfister offers a Lifetime Limited Mechanical & Finish Warranty for residential use, with specific terms for commercial applications. Defects will be repaired or replaced upon notification.
Limitations and Exclusions
The warranty excludes incidental or consequential damages and does not cover improper maintenance, misuse, or Acts of God.
Contact Information
For questions or warranty claims, contact Price Pfister via phone, mail, email, or through the distributor, with proof of purchase if required.
See more

Catalog excerpts

E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C-1

Wall Mounted Tub & Shower Mixer with Showerhead Mezcladora a la Pared de Tina & Baño con Regadera Mélangeur à Montage Mural pour Baignoire et Douche avec Pomme de Douche Wall Mounted Tub & Shower Mixer Mezcladora a la Pared de Tina & Baño Mélangeur à Montage Mural pour Baignoire et Douche Copyright © 2003, Price Pfister, Inc.

 Open the catalog to page 1
E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C-2

ENGLISH Thank you for purchasing this Price Pfister kitchen faucet. All Price Pfister products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This kitchen faucet is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding your kitchen faucet installation call 1-800-Pfaucet (1-800-732-8238). BEFORE PROCEEDING Locate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter. If you are replacing an existing faucet, remove...

 Open the catalog to page 2
E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C-3

3 ATTACHING WEIGHT / CONNECTING PULL-OUT HOSE TO FAUCET 2B INSTALLING THE FAUCET USING THE SINGLE POST RING Ensure that the mounting gasket (A) is pressed frimly in to the faucet body (B). Feed the pull-out hose (C) up through the faucet body (B), until the pull-out hose fitting is flush with the bottom of the mounting shank (D) (see illustration). Insert the faucet supply tubes (E) and mounting shank (D) through the hole in the sink. Feed the pull-out hose (A) down through the faucet body (B), until sprayhead (C) docks into faucet spout (D). Insert the end of the pull-out hose (A) into the weight...

 Open the catalog to page 3
E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C-4

ESPAÑOL Thank you for purchasing this Price Pfister kitchen faucet. All Price Pfister products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This kitchen faucet is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding your kitchen faucet installation call 1-800-Pfaucet (1-800-732-8238). BEFORE PROCEEDING Locate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter. If you are replacing an existing faucet, remove...

 Open the catalog to page 4
E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C-5

tube (G), until unable to push any further. Pull down on quick connect housing (F). If the housing and the inner collet (H) separate slightly, but do not pull off the receiving tube (G), quick connect is secure. 2B INSTALLING THE FAUCET USING THE SINGLE POST RING 4 CONNECTING WATER SUPPLY LINES Separating supply tubes Ensure that the mounting gasket (A) is pressed frimly in to the faucet body (B). Feed the pull-out hose (C) up through the faucet body (B), until the pull-out hose fitting is flush with the bottom of the mounting shank (D) (see illustration). Insert the faucet supply tubes (E) and...

 Open the catalog to page 5
E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C-6

FRANÇAIS Thank you for purchasing this Price Pfister kitchen faucet. All Price Pfister products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This kitchen faucet is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding your kitchen faucet installation call 1-800-Pfaucet (1-800-732-8238). BEFORE PROCEEDING Locate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter. If you are replacing an existing faucet,...

 Open the catalog to page 6
E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C-7

tube (G), until unable to push any further. Pull down on quick connect housing (F). If the housing and the inner collet (H) separate slightly, but do not pull off the receiving tube (G), quick connect is secure. 2B INSTALLING THE FAUCET USING THE SINGLE POST RING 4 CONNECTING WATER SUPPLY LINES Separating supply tubes Ensure that the mounting gasket (A) is pressed frimly in to the faucet body (B). Feed the pull-out hose (C) up through the faucet body (B), until the pull-out hose fitting is flush with the bottom of the mounting shank (D) (see illustration). Insert the faucet supply tubes (E) and...

 Open the catalog to page 7
E09-BT1C, E09-ET1C, E09-VT1C, E09-BT0C, E09-ET0C, E09-VT0C-8

Price Pfister Lifetime Limited Mechanical & Pfinish Warranty Covers Pfinish and Pfunction for as Long as You Own Your Home (Commercial Applications Limit the Duration of the Warranties as Provided Below) Price Pfister Garantía Mecánica y sobre el Acabado Limitada de por Vida Cubre las funciones y el acabado por el tiempo en que usted sea propietario de su casa (Las Aplicaciones Comerciales Limitan la Duración de las Garantías según se indica a continuación) Price Pfister Une garantie limitée à vie pour ce qui est de l’aspect mécanique et de la finition, tant et aussi longtemps que vous serez...

 Open the catalog to page 8

All Pfister catalogs and technical brochures

  1. E533-ENFC

    9  Pages

  2. PONTI

    8  Pages

  3. VTP-R10W

    1  Page

  4. Avanti

    54  Pages

  5. Classic series

    10  Pages

  6. Sanitary Ware

    33  Pages

  7. US Collection

    9  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.