XX Grabs XX Drum handling devices XX Spreader beams XX Technical tips XX The PFEIFER product centre PFEIFER SEIL- UND HEBETECHNIK GMBH Standard programme – Lifting technology DR.-KARL-LENZ-STRASSE 66 DE-87700 MEMMINGEN PHONE +49 (0) 83 31- 937-627 +49 (0) 83 31- 937-591 FAX +49 (0) 83 31- 937-375 E-MAIL [email protected] IN

Higher safety and efficiency with lifting devices made by PFEIFER Highest safety standards Our products comply with highest safety standards as we strictly adhere to valid laws and regulations. We check every device individually for EC conformity and establish an individual operating manual. Moreover, device acceptance before delivery is a matter of course for us. Qualified production We dispose of experience for decades in the production of welded and highly durable lifting devices. Our rich experience is also supplemented by the welding certificate EN 1090-EXC3. Our welders are also tested...

Content More than 40 years of experience For decades, we have been occupied with lifting and transporting goods. Our competences in the area of lifting devices are: – advice – development – manufacture – testing – repair More than lifting We unlock potentials lying dormant in lifting devices. We do not only develop products, but also integrate them into you internal transport procedures. We combine latest technology with well-tried practice and thus create devices which are able for more – more efficiency at work and more safety for the operator. PFEIFER-clamps . . . . . . . . . . . . . . . ....

Vertical clamps PFEIFER clamps Model MPS 1/MPS 2 Product advantages b Functional tool for lifting steel by crane transport of sheets, steel plates, b For the and structural steel elements girders b With rigid lifting shackle b Available with two types of locking systems b Also available for stainless steel and extra hard steel sheets General conditions of usage Load clamps for vertical lifting and turning by 180° The maximum surface hardness of the load to be transported must not exceed 300 HB. Use load clamps in a temperature range from – 20 °C to + 100 °C (ambient or load temperature) The weight...

Product characteristics PFEIFER clamps The body is welded. Perfect protection for the lever mechanism for a long life. Changing any body parts is not necessary! Rigid suspension, max. diagonal pull 10° 10° 100% Type MPS 1: When the locking mechanism is closed, there is a spring tension on the gripping cam, so that the clamp cannot come loose from the load even in case of unintentional release. By opening the locking mechanism and pushing the suspension eye into the body, the clamp can be lifted from the load. Type MPS 2: By opening the locking mechanism, the gripping cam is arrested so that the...

PFEIFER clamp Model MPS 1 with rigid lifting shackle and lock-closed feature PFEIFER clamp Model MPS 2 with rigid lifting shackle and with lock-open and lock-closed feature For the main use of the MPS model series please see the attached drawing and the chart on page 110. 18.

PFEIFER clamps Model MPC 1/MPC 2 b Functional tool for lifting steel by crane b For the transport of sheets, steel plates, girders and structural steel elements b With pivoting lifting shackle b Available with two types of locking systems b Also available for stainless steel and extra hard steel sheets PFEIFER clamps Product advantages General conditions of usage Load clamps for vertical lifting and turning by 180° The maximum surface hardness of the load to be transported must not exceed 300 HB. Use load clamps in a temperature range from – 20 °C to + 100 °C (ambient or load temperature) The...

Product characteristics The pivoting lifting shackle allows lateral attachment to the sheet. Type MPC 1: When the locking mechanism is closed, there is a spring tension on the gripping cam, so that the clamp cannot come loose from the load even in case of unintentional release. By opening the locking mechanism and pushing the suspension eye into the body, the clamp can be lifted from the load. Type MPC 2: By opening the locking mechanism, the gripping cam is arrested so that the clamp can be removed from the load without pushing the suspension eye into the body. Advantage: You can easily remove...

PFEIFER clamp Model MPC 1 PFEIFER clamps with pivoting lifting shackle and lock-closed feature PFEIFER clamp Model MPC 2 with pivoting lifting shackle and with lock-open and lock-closed feature For main use of the MPC model series please see the attached drawing and 110. the chart on page 18.

PFEIFER clamp Model KL for safe lifting up to an angle of 120° The lifting clamp KL makes safe lifting possible up to an angle of 120° – as well for lateral attachment and vertical lifting as for turning by 180° of sheets, steel plates, girders and structural shapes. S turdy and longliving use of latest materials due to H andy slender body due to due to large gripping ranges Individual d ue to additional versions for stainless steel and extra hard sheets (as of 300 HB) optimised safety lever due to pivoting lifting shackle (lock open) and safety lever (lock closed) against uninten tional release...

PFEIFER clamp Model G 2 for heavy-duty lifting Extremely sturdy and capable for lifts up to 100 tonnes. Suitable for the vertical lifting and 90° turning of sheets, steel plates, girders and structural steel elements. The lifting clamp incorporates the lookopen and lock-closed feature. After relieving and securing the load, the clamp can be lifted off with a crane. PFEIFER clamps PFEIFER clamp Model CA with pivoting lifting shackle and clever pressure distribution The large cam jaw enables wide pressure distribution and thus guarantees careful handling of your sensitive goods. For vertical lifting...

PFEIFER clamp Model SCP Screw clamp for vertical lifting and 180° turning of metal items of all kinds. Max. surface hardness of the load 300 HB. Equipped with a pivoting cam jaw. Particularly suited for use with rolling and edging machines. PFEIFER clamp Model SCPA Screw clamp with pivoting suspension eye, for vertical lifting and 180° turning of metal items of all kinds. Max. surface hardness of the load 300 HB. Equipped with a pivoting cam jaw. Particularly suited for use with rolling and edging machines, and for lateral attachment to the load.