ENCAPSULATED
4Pages

ENCAPSULATED THE RAISED FLOOR FOR LOOSE LAY TOP FINISHES

ENCAPSULATED The encapsulated panel is produced with a structural core in chipboard or calcium sulphate and covered with a steel sheet with a thickness of 0,5 mm that completely wraps the superior and inferior parts of the panel along with its edge trim so that the panel is completely encapsulated with double reinforcement fold. This type of panel is suitable for loose-laying finishes like carpet, PVC, porcelain stoneware SOLOGRES, magnetic parquet.

THE ADVANTAGE OF LOOSE LAY TOP FINISHES Loose lay PVC and carpet tiles are an excellent solution in all those cases where it is useful or necessary to make the top finish independent from the floor panel. The advantages of these solutions are : -greater ease in the stages of installation -the possibility to replace the top finish after some years without the entire panel -the possibility to choose the top finish even after the installation of the raised flloor

TECHNICAL DATA SHEET PANEL : IT29 INCAPSULATED Top finish: Galvanized steel sheet Bottom finish: Galvanized steel sheet Description: Modular panel made of High Density Chipboard FSC® core, fully encapsulated in galvanized steel trays, thickness 0,35 mm, doubled with a special vertical and re-entrant structural reinforcement along the whole perimeter. Thickness included top finish (+/-0,3) Orthogonality of panel’s sides Straightness of panel’s sides Maximum vertical curvature of panel’s sides Panel warping Difference between perimetral edges height and surface of the panel Transversal...