Technical Data Sheet Public Extreme

Product catalog summary

Dimensions and Format:
The flooring panels have a width of 190 mm and a length of 1200 mm. Each pack contains 6 panels, covering an area of 1.368 m². The panels are available with 0V, 2V, or 4V bevels and have a thickness of 9 mm. They feature a Perfect fold 3.0 tongue and groove system. Note that there is no water resistance warranty.

Factory Warranty:
The product is classified under usage class EN 13329, suitable for classes 21-22-23/31-32-33-34. It holds a CE certification from EPH Dresden. The residential warranty is 33 years, while the commercial warranty is 5 years, extendable to 10 years upon request.

General Data (EN 13329):
The flooring meets or exceeds various standards: wear resistance (≥ 8500 cycles), wear class (AC6), impact resistance (small ball ≥ 20 N, big ball ≥ 1600 mm), scratch resistance (charge ≥ 5N), and effect of a castor chair (no change after 25000 cycles). Thickness swelling is ≤ 8% after 24 hours of immersion. Locking strength is ≥ 3.5 kN/m for both long and short sides. The flooring shows no visible damage from furniture legs and maintains surface soundness of ≥ 1.50 N/mm². It resists static indentation and staining, with a high light fastness rating of Class 8.

Other Technical Data:
The flooring provides an impact sound reduction of approximately 20 dB on a Pergo underlay. It has a high resistance to burning cigarettes (Class 5).

Environment, Safety & Health:
The product has a formaldehyde emission of < 0.01 ppm, classified as E1. It is anti-static (≤ 2.0 kV) and has a reaction to fire classification of Bfl-s1. The thermal resistance is 0.07 m²K/W, and it is suitable for floor heating with special instructions. Slip resistance is rated at µ ≥ 0.30.

Certificates:
The product holds several certifications, including U-zeichen, AFFSET A+, Nordic ecolabel, PEFC, M1, Singapore Greenlabel, and EU Ecolabel.

Catalog excerpts

Public Extreme Edition 10.2018 DIMENSIONS FORMAT CLASSIC PLANK FACTORY WARRANTY _METHOD PARAMETERS_Pergo VALUES_ Usage class_EN 13329_Class_21-22-23/31-32-33-34 CE_EN 14041_Notified body NB0766 EPH Dresden_DOP: PL 0502_ Warranty Residential use See warranty conditions 33 years 5 years (on request up to 10 years) GENERAL DATA (ACCORDING TO EN 13329) NORM REQUIREMENTS Pergo VALUES Wear resistance Wear class Impact resistance Small ball Big ball Scratch resistance Effect of a castor chair Thickness swelling Locking strength Fl0,2 long side Fmax long side Fs0,2 short side Fmax short side No damage shall be visible,when tested with foot General appearance EN 13329 Dimensional variations after EN 13329 changes in relative humidity Group 1,2 Group 3 Height differences Opening between joints Cupping in the length Cupping in the width 5l residual indentation < 0,05 mm Class 5 _Class 4_ < 0,15 mm < 0,20 mm concave < 0,50% convex < 1,00% concave < 0,15% _convex < 0,20%_ 5l average < 0,9 mm _5w_ Light fastness_EN ISO 105 B02 Blue reference UNILIN Flooring bvba - Oolgemstraat 3 - 8710 Wii elsbeke - Belgle Emall:technlcal. [email protected] - T +32 56 67 56 56 - F +32 56

Open the catalog to page 1

OTHER TECHNICAL DATA _METHOD PARAMETERS Impact sound reduction ISO 712/2 On a Pergo underlay NORM REQUIREMENTS ENVIRONMENT, SAFETY & HEALTH METHOD PARAMETERS Floor heating_On a Pergo underlay See special instructions Suitable_ Singapore Greenlabel_ UNILIN Flooring bvba - Ooigemstraat 3 - 8710 Wi elsbeke - Belgie Email:technlcal. [email protected] - T +32 56 67 56 56 - F +32 56

Open the catalog to page 2

Technical Data Sheet Public Extreme

Technical Data Sheet Public Extreme

Catalog excerpts

All PERGO catalogs and technical brochures

Archived catalogs