General Data
The panel dimensions are 1050 x 310 mm with a total thickness of 14 mm. Each pack contains 4 panels, covering an area of 1.302 m² and weighing 16.40 kg.

Panel Build-Up
The toplayer is made from PEFC controlled sources with a thickness of 3 mm. The core board is HDF Mastercore, and the backing layer is 2 mm of PEFC controlled Spruce or Pine. The panels feature a Uniclic tongue and groove connection for both length and width.

Warranty
Domestic use comes with a 33-year warranty under specified conditions, while the Uniclic connection has a lifetime warranty. Commercial warranty is available upon request.

Surface Layer
The wood species used is Oak, sourced from Europe. It is finished with a UV cured lacquer and an anti-scratch top coat consisting of 5 to 7 layers. Due to natural variance, the visual surface may deviate from samples. Grading and surface treatments are detailed in the catalogue or website.

Installation
The flooring can be installed floating on Pergo underlay or glued to the subfloor using Pergo MS polymer resin, as per installation instructions. It is suitable for underfloor heating with glued installation, following special instructions.

Classification Properties
Wear resistance is rated SIS 923509 with falling sand 800 - 1000 and DIN 68861 S 33 100 - 1050. Scratch resistance is enhanced by an anti-scratch top coat. Stain resistance is class 5 for all except blue ink, which is class 3. The product complies with CE EN 14342: 2013, tested by notified body 0766 EPH Dresden DOP PW 0504. It is tested for 25,000 cycles with castor chairs under ISO 4918. Slip resistance is measured by CEN/TS 15676 dry pendulum test USRV 37-57. Formaldehyde emission is classified as E1 under EN 717-1.

Ecological Certificates
The product holds several ecological certificates, including AFFSET A France, PEFC PEFC/07-32-37, and M1 OK Finland. An Environmental Product Declaration (EPD) is available on request.

Technical Data Sheet
The Pergo Sandhamn is a multi-layer parquet wood floor compliant with EN 13489 and EN14342:2013 standards. PCP levels are ≤ 5 x 10−6n. For further technical assistance, contact UNILIN Flooring bvba.